Every person strives to decorate their home. For this purpose, some buy various decorative items in stores, others make figures from scrap materials with their own hands. Made from wood, glass or metal, crafts occupy a worthy place in the home and attract with their originality.

Making metal decorative jewelry

Nowadays, many people make their own decorative elements. Why spend money on purchasing ready-made jewelry if you can make it yourself from scrap materials? Of course, working with metal requires certain skills and knowledge, so it is recommended to start by creating simple shapes.

To learn how to make crafts from metal, you will need to master the techniques of working with welding equipment. Welding is the best way to fasten metal parts together. If you don't have a welding machine, you can purchase one from a hardware store or ask a neighbor. You will still need electrodes to work.

Material for your creations can be found in the garage among unnecessary spare parts and sheets of metal. Those who constantly create decorative jewelry from iron even visit landfills in search of suitable parts. Thanks to the hands of masters, already obsolete designs take on a new life, being embodied in beautiful figurines and sculptures. Moreover, such material is obtained completely free of charge.

Metal crafts

Iron is a durable material that is used in a huge number of structures. You can make many useful things from it, for example, a table and a bench for a summer house, a barbecue, a stove, as well as original figurines that will decorate the area. Today, landscape design, which can be supplemented with metal products, is very popular in country houses. Crafts of this kind look very harmonious on the site and evoke envious glances from neighbors.

With patience, you can bring to life the most bizarre design. You can make an iron beast or a man, a model of an airplane or a motorcycle. It all depends on your imagination. If you can’t come up with anything, you can look at ready-made metal crafts. Photos of some of them are presented in this article.

Basic safety rules

When working with metal and welding, safety precautions should be observed. You should not handle a sheet of iron without thick gloves. The material may have uneven and sharp edges that are easy to cut on.

When starting welding, be sure to wear a mask or safety glasses. In general, it is better to work in a special suit that will protect you from sparks flying in all directions. Do not cook near flammable materials: plastic, paper, wood.

From all of the above it follows that you can make decorative metal jewelry and crafts for your home and garden with your own hands. At the same time, you will not only save on the purchase of a finished product, but also enjoy the work.

fb.ru

What you can do with your own hands from old scrap metal

Even in ancient times, starting from the 11th century, it became a popular craft to make handicrafts with your own hands, from scrap metal or, as they were called then, metal rocks. Gradually, this craft turned into a real art, which is now an integral historical part of architecture and ancient buildings. You will be interested in seeing sculptures made from scrap metal with your own hands.

Today, there are many types of special tools that allow you to make sophisticated cuts on a metal surface, as well as weld or solder to connect several parts of non-ferrous or ferrous scrap. Modern technologies make it possible for anyone to make a product to their liking; for this it is not necessary to have any special artistic skills. All you need is desire and perseverance. Photos and videos of such handmade crafts can be seen on our website.

Be sure to check out - DIY crafts from waste!

DIY crafts have always been in demand and were quite valuable, as they emphasize the individuality and peculiarity of their owner.

Metal is one of the most durable materials; it can be used to create garden furniture or a children's swing, as well as small jewelry, such as a ring or bracelet.

For example, steel is much cheaper than gold or silver, but has greater strength; it, like precious metals, does not lose its color and does not corrode; many individual and original things can be made from it:

• From a steel barrel, you can make a wood stove.

You can also make many useful and interesting things from waste car parts, for example,

• the valves of an internal combustion engine will make excellent jingling bells for doors,

• piston system and connecting rod mechanism, excellent table stand, it’s easy to make beautiful legs from them.

Environmental benefits

Scrap metal is thrown away every year and simply rots in the ground; instead, you can give it a second life by making some kind of craft; this is not only an interesting hobby, but also a way to protect the ecological system from dangerous elements released during the decomposition of metal in the soil.

You might also be interested in seeing:

DIY rose from a can of cola Coin medallion

Some things are made of stainless steel

ecology-of.ru

DIY metal products: features, types and drawings

In modern conditions, when the market is overflowing with mass-produced goods, handmade products are becoming increasingly in demand. Specialized departments and entire shops or salons are beginning to appear in cities, selling exclusive items made by master craftsmen. If you want to give someone an unusual gift, the best option would be handmade metal products, although there are many other handmade souvenirs.

Handmade exclusive

Execution techniques can be so diverse that the range of products amazes even the most experienced person. Most often, such souvenirs are purchased for interior decoration or as a gift. You can buy or order the following items:

Products can be made using the following techniques:

• decoupage;
• ceramics;
• artistic forging and casting;
• fusing;
• batik;
• Crochet;
• beading;
• embroidery.

It all depends on the imagination and technical equipment and skills of the authors. Among customers with large financial resources, metal art products are especially popular.

Areas of application

Items made using artistic casting and forging techniques are used to decorate elements in various areas of design:

• architecture;
• furniture;
• sculpture;
• cornices;
• staircase balusters;
• fireplaces, stoves, barbecues;
• costume jewelry and jewelry.

Decorative items made of metal effectively complement any interior, giving it a certain chic and luxurious style.

Types of decorations

Do you want to learn how to make metal products with your own hands? Photos of such objects fascinate with their beauty. All things look very elegant, and most importantly, they retain the warmth of the author’s hands. That is why such products are quite expensive. True connoisseurs of style are willing to pay well for something exclusive.

You can make various metal products with your own hands. The following techniques are used to process this material:

The items that can be made using these methods are very diverse. Masters do:

• bracelets;
• earrings;
• rings;
• pendants;
• belts;
• caskets;
• flowers;
• decorative vases;
• interior decorations;
• elegant plates for fruits or sweets.

Making metal products with your own hands is quite simple. The main thing is to know the stages of the process and have the necessary equipment. Complex items require a lot of time and expensive equipment to produce, but some souvenirs can be made from almost nothing. It all depends on what you are going to do this for. If you choose artistic metal processing as a professional field, then you should be patient and realize that some financial investments will be required. To make simple but original gifts for friends, relatives and acquaintances, you only need desire and perseverance.

Manufacturing technologies

You can easily create metal products with your own hands. Photos of drawings and process stages will help you with this. Carrying out artistic work involves stages of shaping, processing and finishing. Making things, as already mentioned, occurs in different ways.

• Casting refers to the filling of a mold with a liquid alloy.
• Forging is the plastic processing of a material with a hammer, a press, as well as bending, twisting, and chopping.
• Bending is a simple type of the previous option, performed by riveting or welding parts of the product.
• Defining is a method of processing a thin, no more than 2 mm, sheet of metal with hammer blows, thanks to which it acquires the required configuration.
• Separate elements are prepared by stamping and cutting and holes are made.
• Filigree is made from twisted or smooth, sometimes flattened copper, silver, and rarely gold wire. The curved parts of the patterns are soldered.
• When minting, a relief pattern is obtained using stamps or special tools that are placed between the hammer and the product.

Drawings of metal products can be done manually or in special programs on a computer. Three-dimensional modeling allows you to make not only a regular drawing, but also to build a three-dimensional model of the future product. It makes it possible to see the appearance of a thing, including in the interior, long before its actual appearance. In this case, it is possible to adjust the parameters of the product without the material costs of re-manufacturing it.

How to make a box from an aluminum can

Even a schoolchild can make the most basic metal thing. The main thing is that this will require practically nothing except time, hard work, imagination and the desire to create. You can make a beautiful box from an ordinary soda can.

Materials and equipment

The raw materials for production, one might say, are lying under your feet on the street. You will also need the following items:

• sandpaper (skin);
• sharp scissors;
• ruler;
• pencil;
• ball pen;
• solid base no larger than A4 format (depending on the size of the box);
• sheet of paper for the diagram.

Sequencing

At the first stage, a layer of paint is removed from the can using sandpaper. It is better to do this from an unopened container, since its walls remain elastic under the influence of the contents. The process will go faster and you won't ruin the metal. If you use an empty one, be careful not to crush the can.

In the next step, you need to obtain a thin sheet of aluminum from the blank, the size of the reamer of the future box.

To do this, the can is cut.
Sharp and uneven edges are removed.

At the next stage, the edges and sides of the product are marked.

A thin metal sheet is placed on a solid base.

The diagram of the box can be drawn directly on a metal sheet.

Or you can trace a sketch made in advance on paper.

When the layout of the box is ready, we proceed directly to drawing the drawing. This is done using a ballpoint pen or a sharpened pencil. Please note that you will have to trace the patterns several times on both sides. This will make the design more decorative and convex.

You yourself were able to see that it is very easy to make products from thin sheet metal. You may well be able to try your hand at this. You can make not only boxes in this way, but anything that comes to mind.

How to turn a hobby into a small business

Making such exclusive gifts can also be a profitable business. You can sell crafts through advertisements or recommendations from friends. If there is a salon in your city that accepts souvenirs, you can donate them there. It is quite profitable today to create metal products with your own hands. They can be put up for sale on many specialized websites. Such online sites are easy to find. The “Masters Fair” works well, but you can use other services.

How to sell your crafts online

If you decide to opt for online trading, then take into account that the operating principle of all stores is the same:

1. You register as a craftsman who sells items.
2. Fill out your profile.
3. Exhibit your work.
4. You come to an agreement with the customer.
5. He pays for the goods.
6. You deliver.

There you can display both finished items and take orders. It is very important to choose the right product category, come up with its description, and choose a high-quality image. Be sure to write a caption for the photo and indicate that you make metal products with your own hands. We accept exclusive items for sale that can easily be sent by courier or by mail to the customer. Items should not contain very thin or fragile items that could break during transportation. If such parts are available, you must provide high-quality packaging so that the product reaches the client in its original form. After all, every mistake can significantly affect your image. Try to complete all decorative metal products with high quality and on time. Good customer reviews play an important role in this line of work. This way you can turn your favorite activity into a source of income.

Finally

So, as you understand, it is quite easy to make metal products with your own hands. This type of activity would be an excellent hobby option. Also, your friends and family will be the happy owners of exclusive gifts. In addition, by offering samples for sale, you will create an image of a good craftsman and be able to make a profit.

fb.ru

Crafts from scrap metal

From what's lying under the welding table. Please do not judge too much for the clumsiness, but because... There is no grinder or milling machine, it was made using a grinder, electric welding, a file (when I was not too lazy))), and a cutter.

Moreover, it was done during lunch breaks, and when you are late...)))

I'll start with small things like cold stuff. From the bearing race. Hardening and tempering are done in a smart way, you can shave.))) I tempered it in an oven for calcining the electrodes.











Full size. Spring, bearing race. The pistol on the right is a working scarecrow gun with primers. At first I made it with construction cartridges, but it really hurt my ears...))) Kholodnyak (large) was forged and hardened in a forge.




Full size MG. Everything works until the drummer clicks. I did it for a week (if you count a couple of hours a day). Not working sights (in the sense of not moving). And the cupcake does not open (why, there are no cartridges anyway)))).

You can make beautiful crafts for your dacha with your own hands from all sorts of things - from what you have at hand. We offer you several simple projects that will take no more than half an hour.

DIY garden crafts.

Owners of old Soviet chandeliers probably immediately recognized what the “water” in this original garden stream was made of.

So, if you have an old chandelier with transparent plastic or glass pendants, then you can make yourself such beautiful crafts for your garden. This option is made with a watering can - we attach beads or pendants to a wire, thread it through the spout of the watering can and attach a nail to the inner end of the wire - it will hold our flow of beads.

The number of beads depends on the size of the watering can - if the watering can is large, there should be a lot of them so that they can be seen from afar. The watering can can be hung on a tree, or attached to a rod in the middle of the flowerbed.

A water faucet can also be decorated with a bead - if the faucet is operational, then it is better to consider a cover for the spout that would be convenient to remove.

For those who do not have an old chandelier with pendants in stock, we offer another project: we concrete the metal rods on a small area, and attach a watering can to their upper ends.

You can leave our original craft in this form, or you can put a container with flowers below or create a flower bed.

Beautiful crafts for the garden made of glass.

Do-it-yourself garden crafts are a simply inexhaustible topic! We will also use the leftover dishes and make a garden angel out of them.

It is not necessary to make your first experiment on unnecessary crystal dishes - you can easily start with ordinary bottles, old salt shakers and glass salad bowls. We connect everything using universal glue. If our base is a bottle, we will also need a metal rod on which we will place our figure.

Oddly enough, such crafts made from scrap materials can be quite functional, for example, a lampshade for a garden lantern.

If not every form of dishware is suitable for a garden angel, then almost everything that is not needed in the household is suitable for magic glass flowers - plates, saucers, vases, bowls, etc.

We select the shape of the flower from the availability of unnecessary dishes - it is not necessary to take only transparent ones; the basis for the flower can easily be an ordinary plate. Glue the dishes together with universal glue.

Think in advance about how you will attach this flower in the garden. There are two options: the first - on the back wall of the flower you glue a bottle (jar, vase, etc.) - a container that can be put on a rod.

The second option is to simply glue a piece of plastic pipe to the plate and put it on the rod.

There are simply a sea of ​​options for such colors: different shapes, colors, combinations... try it!

Metal garden crafts.

Over time, any summer resident accumulates all sorts of pieces of iron in his household, either old garden tools, or necessary pieces of metal that are a pity to throw away and have nowhere to use. From all this metal you can make wonderful crafts for the garden.

Such country crafts can be made from old garden tools, pipe scraps and anything metal that every owner can find in the barn.

The best way to attach such crafts is welding, although for different designs there may be other methods of fastening.

Look at the character of this fun garden figurine made from scrap metal cans and old springs.

And this “master’s dog” is particularly thorough and friendly.

As already mentioned, metal garden crafts can be made without welding. For example, this openwork wire panel is made on a metal frame made of thick wire, to which the entire image is attached with thin wire. Maybe this is a garden nymph, or maybe the mistress of the estate.

Garden crafts made of stainless steel look more neat and do not require regular maintenance, but they are more difficult to manufacture.

For the bravest: a grasshopper-mailbox can not only surprise your good friends, but also frighten uninvited guests.

Our imagination is amazing - this either a pig or a puppy that is waiting for us in the depths of the garden is charming and makes us smile.

Metal garden crafts require not only the availability of suitable material, but also your free time. Don't feel bad about wasting your time making a garden figurine instead of painting a fence.

Original crafts for the garden.

Look around - is there any metal mesh left in the barn after renovation? Excellent material for garden lamps.

If you have old spoons lying around, teach your son how to solder, and he will be happy to remember the funny things he did as a child with his father.

After all, such crafts for the dacha show that we not only know how to work well, but are also able to have fun and relax from the heart.

Create your own mood - make your own version of original garden crafts at your dacha.

Surely you can find metal waste at every dacha. It could be like small screws, nuts, and larger products. For example, pipe scraps, leftover metal sheets, etc. However, metal waste can be useful not only as recyclable materials. You can use them to make a variety of things that will decorate your garden. You can make various beautiful products from ordinary wire and pieces of metal.

Many summer residents decorate their plots with expensive metal crafts purchased in stores. Manufacturers justify the high cost of crafts by the fact that they are usually created by hand. However, if craftsmen from manufacturing companies can create beautiful metal products with their own hands, then why not do it ourselves? To create things like this no complicated devices required. Everything you need can be easily found at the dacha.

Safety precautions

First of all, you should think about safety precautions. Of course, when working with the simplest materials, without welding, it is almost impossible to get seriously injured. However, during production crafts from a tin can, you can get seriously injured.

If you work with ordinary wire and nuts, it will be enough to wear safety glasses and hard gloves on your hands. When working with a welding machine, the equipment must be more serious. In addition to gloves, you should wear a mask and face shield, as well as a protective suit. The room must be ventilated regularly. When working with wood (if there are ignition sources nearby), you should always be able to put out the fire.

Metal crafts

For your first DIY metal crafts, you don’t need any complicated tools or equipment. A simple aluminum tin can is enough. You can make a small box out of it. In addition to the jar, you will need:

• sandpaper;
• scissors;
• ball pen;
• gloves.

It is advisable to take a whole jar, not open. The surface of the still intact can must be cleaned of paint with sandpaper, while trying to do everything carefully so as not to accidentally bend it. Next, you need to cut the can so that you get a rectangular blank. To do this, the bottom of the jar is cut out, and the top part is cut lengthwise. All roughness and sharp corners must be removed (with sandpaper).

Then you can start creating a diagram of the designs on the product. Using a regular pen, you can easily squeeze out patterns on the jar, since aluminum is a soft metal. Then all that remains is to form the jar so that it takes the shape of a box.

More complex products

Crafts made from scrap metal can be much more complex and interesting than a simple box made from a tin can. You can make practical products. It’s easy to make a barbecue from an empty metal barrel. In addition to the barrel, you will need:

• iron rods or pipe scraps for legs;
• welding machine;
• Bulgarian;
• for safety - protective accessories.

The barrel needs to be cut lengthwise. The legs are welded to the lower part, the top will be the lid.

Naturally, a barrel of chemicals, paint or other similar non-food substances is not suitable for making a barbecue. It is optimal to use a water container.

Complex products

There are many interesting techniques with which you can create beautiful iron crafts.

• Filigree. This technique allows you to make beautiful patterns from wire by soldering.
• Coinage. The technique is quite often used to make crafts. The technique involves changing the shape of a product using a hammer.
• Casting. The mold is filled with molten iron (or alloy), giving the product the same appearance as the mold. This method of making crafts is similar to the factory one.

At first, complex crafts will not work. And simple products, frankly speaking, will be unimportant. But gradually the skill is developed, and making a complex craft is not difficult. Ideas can be taken from special magazines and books. But it would be much better to make products according to your own drawings. By constantly improving your technique, you will be able to create real masterpieces from metal.

Forged metal products have been and remain in demand, despite progress, new materials and technologies. The secret of popularity lies in the combination of two qualities - beauty and durability. Forged products may look light and elegant, but at the same time a person cannot break them! By mastering the production of metal products, you can create an excellent source of income. First things first!

In our imagination, forging metal represents taming it with the help of fire, a hammer and an anvil. However, along with the hot type of forging, cold forging is also possible. Unlike the first method, cold forging can be mastered by almost anyone at home.

Hammer and anvil for forging metal

Hot working involves heating a metal workpiece to a high temperature. Thanks to this, the molecules are in a less dense arrangement and the metal becomes ductile and malleable. Using a hammer, the blacksmith gives the desired shape to the workpiece - for this, many different techniques are used.

However, setting up a real forge at home with your own hands is not so easy. First of all, you will need to purchase a forge, which consumes a lot of fuel. It is simply impossible to install a forge in an apartment or garage for fire safety reasons, so you can forget about hot forging in urban conditions once and for all. The forge is not the only problem, because you need to know a lot of other features of high-temperature metal processing.

Forge

Cold forging causes much less problems. Firstly, it is accessible to a much wider circle. If you have a garage or workshop where there is still room for several devices and machines, then you can safely master the skills of cold forging. This can be a fun hobby at first, which is especially useful for homestead owners. However, over time, you can turn this hobby into an income source. In any case, you will first have to spend some money on tools and supplies.

Cold forging simultaneously bends and presses the metal, creating very strong products that are stronger than those produced by casting or stamping. The finished structure will be very resistant to damage - it is not afraid of vandals and thieves. Therefore, cold forging is so often used to create decorative and protective elements, such as window grilles, canopies, railings, gates, fences, gates, as well as tables and chairs, decorative stands and fireplace grates.

There are many ready-made machines for do-it-yourself cold forging - the simplest ones perform only one function, the more complex ones can perform several operations. In general, the equipment is quite simple - both in operation and in design.

Cold forging of metal

• The basic tool that both an experienced craftsman and a novice cold forging enthusiast should have is a bender. Using this device, you can bend a metal bar with your own hands at any angle. Gnutik will also help in creating beautiful arcs with any radius.
• The snail allows you to create spiral elements. Ready-made tools are most often limited to a bar diameter of 12 mm, but you can create a homemade snail to fit any workpiece diameter.
• Flashlight – equipment for creating an element of the same name. This equipment allows you to weave iron rods in a special combination. Using a flashlight you can also make a “Basket” element. To work, you will need either metal rods with a cross-section of up to 30 mm, or squares with a cross-section of up to 16 mm.
• Another tool for cold forging is the wave. The name matches what it does - by passing a square or rod through the tool you will get a wavy part. Using this tool, you can process a wide range of rolled metal with your own hands - from round tubes of small cross-section to hexagons.
• Of course, a cold forging master cannot do without a twister. Using this equipment, a bar or square profile is rotated around the longitudinal axis. This operation can be carried out with a square cross-section of up to 16 mm. A twister will help make ordinary rods in a product more refined, attractive, without losing strength and integrity.

Twister for twisting the rod around the longitudinal axis

Without these tools, it is impossible to do cold forging with your own hands. You don’t have to buy everything at once - perhaps you should get a bender first, then a twister, a snail, a wave, and then you can buy or make a flashlight yourself. When you completely master all the techniques with one tool, buy a second one. You can put aside the figured blanks you received during your studies - they will definitely come in handy when creating your first masterpiece.

When the first tools have been purchased and the skills to handle them have been acquired, it’s time to create something more worthwhile than a couple of curlicues. If you plan to turn this hobby into a profitable business, then the best advertising for you is finished products, for example, gates for a country house, window bars or flower stands. In a word, everything that catches your eye. Surely your neighbors and friends will notice the changes in the arrangement of your home and will want to buy such useful decorations for themselves.

Gates for a country house

The creation of any product begins with a sketch - carefully draw and mark all the details on a sheet of paper, maintaining the scale. By putting down the dimensions, it will be easier for you to calculate the number of elements needed and the volume of material.

The sketch will help you make all the parts the same. Then you can go to the store for shopping. To begin with, try to purchase rods and square profiles of medium section - they will be easier to work with. Rolled metal with a large cross-section is difficult to bend using cold forging; you may need stronger and more massive tools than those you already have.

Medium square rods

When the material is purchased, carefully set the settings on the equipment. Correcting mistakes can sometimes be very difficult. In addition to working with equipment for cold forging, do not forget to master the welding machine - the easiest way to connect parts is by welding. Be careful when working with thin-walled parts - they can easily be burned through.

Cold forged elements often imitate the forms of the plant world. However, all these curves and curls look incomplete - like a tree without leaves. Leaves are excellent metal products for decorating window bars or metal gates. You can get by with store-bought ones, but for the same money you can make twice as many leaves.

Making leaves from metal is not at all difficult. To get started, you will need one or more templates. Pick a leaf you like from the apple tree and transfer its shape to thick cardboard. If you need a lot of leaves, then the patterns should be different so that the finished ornament does not look monotonous. The templates should differ from real leaves in only one detail - special ears should be left on the tips on one side, with the help of which these elements can be secured to the frame.

Metal leaves

For such decor, a regular thin sheet of metal is suitable. It can be stainless steel or a sheet of steel - the thinner the better. You also need sharp ones. To begin, cut the required number of leaves according to the template with your own hands, then grind off sharp edges and burrs, smooth out angular shapes. Then mark lines on the outside, as on living leaves.

Go along the marked lines with a chisel. Punching out the contours is not at all difficult, the main thing is not to overdo it and not punch through the metal. Place a thick wooden block under the metal - this will make less noise, make it more difficult to pierce the metal, and make the bends after the chisel more natural. First, walk along the center line, and then reflect the side ones - in the process you will see for yourself where the metal bends and how best to unfold it.

The contours of leaves knocked out with a chisel

If the leaves are large, then they can be used as separate elements directly to decorate the forging. Small leaves can be collected into wire branches. It is visually easy to understand how many elements are needed on each side of the branch. With the help of the ears, the leaves are easily attached to the wire, and then you yourself must determine how best to bend your branch and where best to direct it. If the leaves scroll, then each element can be secured with a soldering iron or electric welding.

Using the same technology, you can make more complex grape leaves or ivy leaves with your own hands. In a word, don't stop there! Once these decorative elements are securely fastened, all that remains is to paint them - black paint with gold or silver highlights looks very good.

But this thing can be made at home with a minimum of tools. But the grill will last for many years, delighting you with delicious barbecue. The dimensions of the grill depend on your needs. The width is always the same - 30 cm, this is just the required distance for convenient placement of the skewer on which a portion of kebab is strung - 8 pieces of meat.

Grill dimensions

The length of the grill is calculated based on the number of skewers. Each skewer is allotted 10 cm, so just consider - in order to cook shish kebab for a company of 8 people in one go, you will need a grill 80 cm long. The depth of the grill is usually made within 20 cm. This space is enough for coals and placing the meat in such a way so that it cooks evenly and does not burn. Height is a strictly individual matter, and is calculated based on the height of the kebab maker at the level of the arm bent at the elbow.

You will need heat-resistant or regular sheet steel 3–4 mm thick, 4 meters of angle, an angle grinder with a disk for cutting metal, a welding machine and a drill. If you want to make a collapsible barbecue, then the welding machine should be replaced with bolts and nuts, but in general the manufacturing procedure remains the same. For the legs, steel corners with a shelf of 20–30 mm are used.

Manufacturing of a welded product

First of all, we make markings on a sheet of metal with our own hands in accordance with the calculations performed earlier. Then, according to the markings, the elements of the grill are cut out: walls, bottom. The fastest way to cut is with a grinder, but you can also use a hacksaw or jigsaw. In the lower part of the future walls, holes are drilled along the entire length - they are needed for oxygen access to the hearth. Holes can also be made at the bottom of the grill. Also remember to cut square or triangular holes on the top edges to secure the skewers. Then all that remains is to assemble all the elements into one design. If the grill is stationary, then all parts are fixed with a welding machine; if it is dismountable, then holes are made for nuts and bolts, and only corners with holes for fasteners are welded to the walls.

If you want the legs of the barbecue to be able to be unscrewed, then you should weld nuts to the walls, and cut threads at the ends of the pieces of reinforcement and screw the pieces into place. In this case, the grill becomes more mobile - the legs can be unscrewed, and the box can easily fit into the trunk of a car.

First products - metal crafts were made in ancient times by skilled craftsmen. Gradually, artistic forging turned into a real work of art and, starting from the 11th century, became an integral part of architectural structures in Europe. Today, metal products have a high cost, but at the same time they can emphasize the exclusivity of the exterior or interior of an apartment or country house. We offer you several master classes that will help you make metal crafts with your own hands.

Metal owl

Materials:

• paper;
• pencil;
• sheets of cardboard;
• scissors;
• sheet metal 1.5 mm thick;
• Bulgarian;
• chisel;
• hammer;
• welding machine;
• chemical rust remover;
• 2 washers and 2 bolts for them;
• rod 6-8 mm.

Let's start making metal crafts - an owl

1) Using a pencil on a sheet of paper, draw an owl.

2) We visually break the owl into separate elements and transfer them to sheets of cardboard to make the owl life-size. Cut out the templates with scissors.

3) Now we apply the cardboard templates to the sheet metal, transfer them and carefully cut out each detail of the owl with a grinder.

4) In the part that is the eyes of the owl, we make holes for the bolts. We make them using a chisel and a hammer.

5) Now we make feathers on all the parts of the owl. To do this, take a chisel and make notches.

6) Paws are easy to make from a rod. We cut off the pieces needed for the paws from the rod and weld them together to form a paw. We do the second one in the same way.

7) Make a beak from a piece of sheet metal.

9) Now you can connect the parts into one whole. To do this, carefully weld each of them to each other in the required sequence on the back side of the owl. Then we weld the beak and paws to the finished owl.

10) Now, using a chemical solvent, we clean the owl from rust. Follow the instructions on the solvent. If you don't have a suitable solvent, make a solution of baking soda and water at home. It should be so thick that it spreads easily over the surface. Clean the owl with an old toothbrush, and then rinse thoroughly. It is recommended to do all work with solvents with gloves.

11) When the cleaning process is completed, cover the entire owl with a special varnish. It can be purchased at a special store.

Metal owl craft ready. It will become creative, made with love and skill, and will keep memories of the master forever.

Metal figurines look original in a flowerbed or in a garden at your dacha, so with the help of our step-by-step instructions you can easily make a rat or some other animal out of metal.

Material:

• Bulgarian;
• drill with metal drill bit;
• metal scissors;
• electric welding;
• grinding circle for grinder;
• rods with a diameter of 4,6,10,12 and 14 mm;
• 2 mm metal sheet;
• wire;
• metal ball from the bearing 3 pieces.

1) Take two pieces of metal pipe (this rat is 50 centimeters high). We make a head from one of them: we cut out identical segments along the entire diameter and get a blank, as in the photo. Then we weld and, using a grinder with a cleaning wheel, clean this part. We make the body and also clean it in a similar way. Consider the proportions: the head is larger than the body. We weld the head to the body.

2) Transfer sketches of the rat’s ears and paws onto a 2 mm sheet of metal and cut them out. We roll the paw blanks into a funnel. We scald them and clean the seams. Then we electric weld each leg to the body and clean the seams again. We weld the ears to the head and don’t forget to clean the seams too.

3) Now we make the rat’s paws and hands from twigs. For the upper legs, a 4 mm rod is welded to 10 mm, and for the lower 6 mm legs, it is welded to 12 mm. We insert it into the holes of the funnels and scald it with welding.

4) We make the tail from a 14 mm rod and weld it to the body.

5) Let's move on to the rat's face. First, let's make two holes in the head for the eyes. They should be smaller than the bearing balls. Now let's drown these balls in the holes and weld them neatly and thinly. We electric weld the remaining ball in place of the nose. Drill holes for the wire whiskers and insert it.

7) Then we make longitudinal welds close to each other throughout the rat. This will create an imitation of wool. Now we clean the whole craft again using a grinder with the required disk. This is necessary in order to rid the product of scale, slag and add shine.

8) At the end of the work, we apply a special varnish to the metal rat, it can be colorless, or it can have some effect. It's up to you. The rat in the photo is coated with colorless varnish with a satin effect.

Now all that’s left is to figure out where to put it or who to give such a wonderful gift to.

Rose- This is a unique flower, the beauty of which I would like to preserve for as long as possible. Metal rose will delight you for many years and will decorate the classic bedroom interior.

Materials and tools:

• yews;
• sheet metal 0.5 mm;
• metal scissors;
• steel wire 6 mm;
• grindstone;
• pliers;
• hammer;
• Bulgarian;
• metal paint;
• welding machine.

Master class metal rose

1) During work, follow safety precautions, use gloves and a welding mask.

2) Using special scissors, cut out petals for a bud and a couple of leaves for a rose from sheet metal. We cut out the petals in the following sequence: from smallest to largest, starting from 15 mm and ending with 80 mm. You need to cut about thirty petals, then the bud will be dense and full.

3) Then smooth the edges of each petal using a sharpening stone.

4) From the remaining scraps of sheet metal, cut out triangles - they will become rose thorns. Their size should not be less than 10 mm.

5) We make a stem blank from steel wire. Our task is to get rid of its flat state. To do this, we can use a hammer to bend it a little so that it looks like a real rose stem.

6) Create a bud. The first two smallest petals need to be clamped in a yew and bent in half. Next, we begin to form eight petals in an arc relative to the center of the bud, but be sure to grab each part by welding and then clean it.

7) All subsequent petals are also formed in an arc, but bending the top of the petal. We do this procedure with a hammer. And just like the previous petals, we weld them and clean them again.

8) Now we weld the thorns to the already prepared stem. Then we clean them with a grinder.

9) Rose leaves. You need to squeeze and release the leaf in a yew to create a vein. Then we bend the edges using pliers. Now we weld the leaves to the stem and clean the seams.

10) We weld the rose bud to its stem, carefully clean the joints and cover the entire rose with metal paint.

A beautiful flower that combines the tenderness of beauty and the rigidity of metal is ready. An original and such a painstaking gift will delight the female eye for many years.

Metal crafts: Panel - fish

Panel is a decorative composition that serves for beauty and comfort in the home. It can be a carved or ceramic composition, bas-relief or stucco. In the architecture of buildings there are often panels made of tiles of different colors or using the mural technique. We offer to make crafts from metal: a wall panel from a metal frame with your own hands.

Materials

• thick wire;
• thin wire;
• beads, a lot of beads;
• a dozen beads;
• paper;
• a simple pencil;
• scissors that can cut wire.

1) The very first thing you need to do is draw a sketch of the fish that will occupy a central place in the panel.

2) Based on the sketch, we begin to make a fish frame from thick wire. At the same time, we make curves, as in the photo. In paragraph 5 you will understand what they are for.

3) From the same wire we make jumpers that will increase the rigidity of the structure.

4) Thin wire is needed to fix the frame.

5) Now we begin to fill the fish with beads and beads. To do this, we attach a thin wire to the curves on the frame and begin to string beads onto it. So we braid all parts of the fish with beads, while securing the wire with the beads. To make the product look aesthetically pleasing, do this on the back side of the fish. The beads will help highlight the large scales of the fish, and one bead will be used to make the eye. The color of the future craft depends on the selected beads, so use your imagination and don’t be afraid.

The finished fish can be hung on the wall in the nursery or hallway. It will become not only an interior decoration, but also a pleasant gift for a fishing enthusiast. We recommend making several fish so that you can create a whole one on the wall.

Metal crafts parents can do it with the whole family, as they need to follow safety precautions when working with a welding machine. If you do not have special skills in working with metal, you can make a craft from wire or a tin can, which will also look exclusive. This concludes our article about DIY metal crafts; see more crafts on the website.