What is the name of the beer coaster?! When we ask this question, I’m sure many people think of the bearded joke about the “cookie”:

A tourist walks into a bar and orders a glass of beer. The waiter brings it, placing a coaster. A moment later again:

• - A mug of beer!

The waiter complies, noticing that there is no coaster. Well, he thinks, you never know... A moment later, another order:

• - A mug of beer!

The waiter brings it, but there is no stand! Collecting or something! Order again:

• - A mug of beer!

This time the waiter brings beer, but decides to cheat and places the mug on the bare table! To which the question comes:

• - And the cookie?

However, we all know that this is an important attribute of beer culture, such as a beer label, mug or. The function of this attribute is to provide convenience and comfort when drinking foam in a bar.

So, to the question of what a beer stand is called, we answer - coaster. This item has its own history, like any other representative of beer culture. Literally translated, the word “beer deck” means “beer cap,” even though we now use it in the “opposite” direction. The traditions of the 19th century and the established culture of beer consumption in taverns are to blame for this.

Coasters have been part of beer culture for over a hundred years. Currently, this is an important element of advertising, and advertising in some cases replaces the original functionality of the stand. Leather, rubber and plastic products are beautiful and very informative, but they cope with their main task much worse than cardboard stands.

Limited edition beer coasters and rare antiques are always welcome items in albums. From the coasters you can observe the history of the development of the coasters themselves, the beer industry and even the evolution of beer varieties.

We hope that you received an answer to the question of what a beer stand is called and this information will be useful to you, but if you still have “blank spots” - be sure to write to

The first piece of furniture that a visitor or guest sees when entering an apartment or office is a hanger standing in the hallway. Depending on this, an impression or opinion is formed about the entire room and the owner of the house. The range of equipment designed for storing clothes is very wide, so there are ample opportunities for decorating the interior of the room (corridor, hall and others).

Floor hangers on wheels are very convenient and practical in the interior of an apartment. They can be used for the hallway, in or rooms, on the veranda. Modern designers come up with and give such a piece of furniture various shapes and interesting figures.

Advantages of floor clothes hangers on wheels:

What is the name of a clothes hanger on wheels (types and photos)

This is usually what they call it: a hanger on wheels. A little less often you can find another name: wardrobe rack on wheels.

The floor hanger rack on wheels has become a permanent attribute of various clothing stores. Such racks are often used in locker rooms, wardrobes and at sales exhibitions. Clothes are hung on hooks or hangers. The wheels, which are located at the bottom of the base, create additional convenience for easy and quick movement of even a hanger already loaded with things.

Depending on what material they are made of, hangers are:

• metal- have great weight and stability. For production, chrome-plated aluminum is used, which can be painted in any color if desired;

Metal hanger on wheels

• forged structures- unique in appearance, serve as an additional decoration for the room. Very practical and convenient;

Wrought iron hanger on wheels

• wooden hangers- have an attractive appearance and durability. Various types of wood are used for production. Suitable for various interior styles: from classic to fashionable loft and country;

Wooden hanger on wheels

• plastic models- too light in weight, so they can only be used for a small number of things.

Floor hangers on wheels are the most convenient and common type of equipment for locker rooms in schools, offices or apartments.

Clothes hangers on wheels - wooden or metal?

Metal hangers on wheels

Due to the simplicity of the design of metal hangers on wheels, it can be moved around the house. The hanger can be decorated with various decorative elements, which will decorate the home interior. If the room is cluttered with other things or details, then you can simply move the hanger to another room.

The designs of metal hangers can consist not only of a hanger rack, but also be supplemented with drawers and shelves for various accessories. The shelves can be made of metal, wood or other material.

Photos of various models of hanger racks on wheels:

Wooden hangers on wheels

The peak of popularity of wooden hangers occurred in the 20th century, but now they are gaining popularity again; they are often used in hallways and other rooms. The advantage is their decorative functions: they fit perfectly into the interior of a room made in both classical and modernist styles.

Modern industrially produced wooden hangers on wheels come in several types. They differ in purpose, size, appearance and type of wood from which they are made:

• Suit hanger- usually of medium height, used for individual use. You can hang your jacket, trousers and other details of a business suit on it. It is intended for one person, so most often these hangers are placed in a bedroom, office or hotel room. The advantage of a hanger is that clothes are wrinkle-free during storage.

The same hanger can be supplemented with a shelf for shoes at the bottom:

The size and height of such a hanger are selected according to the age and height of the child, for example, for a small child, a low “Baby” hanger is suitable, with convenient drawers at the bottom for books, handbags and toys. Children's hangers are always beautifully designed, have bright colors, and wheels make it easy to move such a thing to the right place in the room for the baby.

Children's wooden hanger on wheels

The reliability and stability of the children's hanger is ensured by its body design. It will be convenient that you can approach such a hanger from any side. Hangers are made of wood and coated with polyurethane varnish to avoid scratches during use.

For older children and children, stand-up models are used that can accommodate a larger amount of clothes hung on hangers.

Wooden hanger on wheels for girls

There are also small models designed specifically for hanging school uniforms: a dress or trousers on such a hanger will not wrinkle, as they are hung on special crossbars.

Wooden hanger on wheels for school uniform

How to choose a hanger on wheels

In the home interior, a hanger is used for outerwear, storing bags, umbrellas and other accessories. It saves space and can be used in a variety of configurations to suit the space.

The main question when planning and purchasing a rolling hanger is its purpose. Depending on this, the apartment owner chooses the desired model. The hanger is also selected to match the interior of the apartment or office:

• If needed hanger for one person, it's better to choose costume version of a wooden hanger. It is better to place such a hanger in the bedroom for individual use or in the office of the office manager.
• For shops and exhibitions will fit better durable metal hanger racks that can withstand a lot of weight (if there are a lot of things) and will be convenient to move around the room as needed.
• To select a hanger in the hallway of an apartment or house need to build on design in the interior. If the interior is made in a classic style, the best options would be a stylish forged hanger or a wooden hanger with decorative ornaments. A chrome-plated metal hanger will suit the interior of a home with a more modern style.
• The best option for children's room there will be children's wooden hangers, selected according to the child’s height and decorated in accordance with the interior and its wishes.

DIY clothes hangers on wheels

Wooden homemade hanger. An original solution for decorating the interior of your home would be a floor hanger on wheels, made of wood with your own hands. Every home craftsman can make one.

The design is very simple: width 1 m, height 1.3 m, see photo for plan:

• To work, you need to buy 2 beams measuring 40x40x2000 cm. A shovel handle works well for the top crossbar. The parts are cut according to plan:

• The biggest challenge is making the bottom of the hanger stable. To make the crossbars exactly at an angle of 45 to the bottom, it is better to align the joint using a square. Then you need to screw the slats. The design of the side part is ready:

• The rail should be secured in the same way at the junction of the two sidewalls at the bottom. For strength, all joints can be coated with PVA glue:

• The top crossbar is screwed on with long screws. Wheels are screwed to the bottom, which can be bought at a hardware store.
• Now the hanger on wheels is ready - the dream of some housewives. Its cost was approximately 150 rubles ($5):

DIY hanger on wheels made from pipes

The hanger is made of metal tubes with a diameter of 22–25 mm. You will also need wheels, screws and a drill.

• For a vertical base, pipes 1.3–1.7 m long (2–3 pcs.) are needed. Horizontal ones are made shorter - 0.7–0.9 m (4–5 pieces) and are used as lower crossbars.
• One of the horizontal pipes connects two vertical pipes at the bottom using screws, the remaining ones are attached tightly. So these bottom pipes form the bottom of the hanger.
• The top crossbar is screwed in the same way, holding the entire structure together.
• The entire structure can be placed on wheels; they are attached to the corners of the base.

Watch also the video on how to make a floor hanger with your own hands:

A mug stand today is becoming a familiar attribute for every home, be it a family home or a bachelor’s apartment. This small item combines a lot of advantages - it helps preserve the surface of tables, decorates the interior, is relatively inexpensive and even serves as a collector's item.

In our country, interest in this attribute is just beginning to grow, while in the West the practical and inexpensive accessory has been used for quite a long time. In addition, this item has its own history as well as manufacturing standards. How did the mug stand come about? What is the name of this accessory and what can it be made of? Let's find out from a short excursion into history.

Coaster, fire, beermat or tatsek?

It turns out that the mug coaster has a name - coaster. The word comes from the German bierdeckel, which means “beer lid.” It would seem, what does the lid have to do with it? It's all about the widespread tradition of 19th century Germany to close the lids to protect the drink from insects and dust. Only for rich people, the lids were made of tin and were not removable, while less wealthy citizens covered their beer with round pieces of felt. It was on these felt coasters that beer mugs were sometimes placed to remove the flowing foam.

The Germans liked the idea of ​​placing a mug on a mat to absorb excess moisture so much that in 1893 they patented a more practical water coaster made of moisture-absorbing cardboard. This is how beer mat appeared, from the English beermat (beer - beer, mat - rug). A beer mug stand can also be called tacek (in Czech). But if we are talking about an ordinary cup that requires a stand for hot food, then the word bonfire (from the English coaster) is more often used, which means “mat for a cup.”

What are coasters used for?

A mug stand turns out to be a very functional accessory. In a stylish kitchen, such a piece of furniture can add missing accents or add coziness. In addition, not all surfaces can withstand moisture or temperature, so a coaster will help prevent untimely damage to the table. It will also protect against possible scratches that mugs leave on glass and varnished surfaces.

Another main function that has made coasters popular in drinking establishments is their use as a marketing tool. Back in the 19th century, they noticed the effect of the receptivity of information on the pleasant emotions that a person experiences in relation to drinks. It is at this moment that the mug stand catches your eye. Photo printing on a stand is a modern trend, but beer brands and establishment names began to be placed on coasters from the end of the 19th century, because the advertising advantages of this item can hardly be overestimated.

Shapes and materials

The original mug stand, in the form in which we see it every day, was made of compressed cardboard in the shape of a circle with a diameter of just over 10 cm and a thickness of 5 mm. Today, manufacturers and home craftsmen come up with new stands every day of different shapes from all kinds of materials. And if a company that produces coasters for beer manufacturers or drinking establishments must take into account the hygroscopicity of the material and its thickness, then there are no restrictions for an interior mug stand.

There are two main categories of coaster shapes - simple and complex. Round and square stands can be simple, but complex shapes are distinguished by polygonal, curved surfaces and in the form of silhouettes of objects. In addition, today a mug coaster is not just a felt piece of fabric. The accessory can be made from anything: wood, stones, porcelain, leather, shells, glass or cork. Coasters are even knitted or using polished sections of agate.

Tegestology

Today, a mug stand is not only a functional piece of furniture or a marketing tool. Many people are interested in collecting coasters, devoting a lot of time and effort to this hobby. Surprisingly, an official Latin term was invented for such an activity - tegestology (from the word tegetis - “rug”), and the collectors themselves are called tegestologists.

Most testologists live in Germany, the homeland of the accessory. For them, in the middle of the 20th century, a special society was created called “Collectors of Beer Paraphernalia”, which has international status. Testologist clubs are common in the UK, as well as in Wales and Australia. There are several categories of coaster collectors; for example, some are exclusively interested in ceramic or felt coasters.

A bar table, if there is one in the kitchen, is statistically used even more often than a dining table. When purchasing a bar counter, think in advance what accessories you will need, do you need a wall-mounted bar system, central and side shelves, or will it be enough to hang a small cabinet?

Pros and cons of equipping a bar counter

Kitchen bar accessories have their pros and cons.

Pros:

• this is an excellent solution if there is not enough space to store things;
• The central and side shelves are very convenient and functional to use.

Minuses:

• the need to regularly wipe dust off bottles, glasses, and cutlery;
• a large number of accessories overloads the space; owners should be especially careful when filling the rack.

Types and types of bar counter equipment

Accessories and fittings vary in the method of fastening, shape, materials and purpose.

According to the method of fastening, we can distinguish:

1. Central shelves for the bar counter, which are mounted on the pipe in the center;

1. Side or rotating shelves, which are attached to the pipe to a handle that extends to the side;

1. Suspension systems that are attached not to the bar counter and pipe, but to the ceiling.

The shape of the central and side shelves can be cone-shaped or round.

According to their purpose and functions, bar accessories are divided into:

1. Glass holders;
2. Bottle holders;
3. Universal - for storing things, dishes, food and serving;
4. Hangers for cutlery, mugs, napkins, etc.

Accessories and fittings are most often made of metal or a combination of metal and glass. But the color of the metal can be the following: gold, bronze, copper, glossy and matte chrome.

The color of accessories and furniture fittings must match the color of the kitchen fittings. Read more about color combinations in the kitchen interior.

What furniture fittings are needed to create a multi-level structure of shelves?

First of all, you need a pipe that serves as a foot and base-mount for the shelves. It is made of brass or nickel and is most often 50 mm in diameter. The pipe (or rod) is secured to the rod holder to the floor, with side fastening to the wall and/or to the ceiling with ceiling fastening. The bar counter is also attached to the tabletop with a special flange.

How to choose the right package

Let's figure out what will really be necessary and what is better to refuse so as not to clutter up the space.

It is necessary to choose accessories for the bar counter based on its purpose. In what capacity is it most often used: as a home bar for parties and celebrations, as a table for breakfast and snacks, an additional surface for cooking, working at the computer, or simply as an accessory that separates the space?

If the bar counter is, first of all, a place for you to relax with friends, then equip it with a multi-level composition of: a glass holder, a central shelf for bottles, a side shelf for serving and storage. If the kitchen and the counter itself are large, and you want to create the atmosphere of a real bar, then install a wall-mounted system.

Using more than three shelves is only permissible if your bar counter is a bar counter and not a breakfast table.

If you often cook at the bar table or want to use it to store kitchen utensils, then you will need: triple hangers with hooks on which you can hang ladle, a side shelf for serving, a universal central shelf for storing things (preferably with high sides) and optional glass/bottle holder. But, if there are children in the house, then, of course, it is better to abandon this idea.

In other cases, it will be enough to put it on the wall