If the local thermal power plant is not operating efficiently or during a seasonal shutdown of hot water, a water heater will be an indispensable device in every home. Choose a device that will not only cope with its task, but will also be cost-effective.

How to choose a water heater

There is no definite answer to which water heater you will need personally for your needs, since manufacturing companies offer devices whose designs are implemented on the same operating principles as those of competitors.

What factors should be considered when choosing a water heater?

• Heater type. The storage water heater is equipped with a thermally insulated tank in which water is stored. The instantaneous heater is more compact and provides hot water as needed. Such a device is more economical, but provides a limited flow per unit of time.
• Source for heating water. Gas boilers require less energy and are more budget-friendly than electric ones, although they may be more expensive at the time of purchase. Indirect heating devices need to be connected to a separate heating boiler, which complicates installation. Solar heating systems are also available.
• Storage water heater capacity. To determine capacity, consider the number of people in the family, shower and bath costs, and the presence of water-consuming appliances such as a washing machine and dishwasher. In order to heat the water to the required temperature, the storage device will take some time. Once the tank is used up, you will also have to wait for a new batch of hot water.
• The amount of flow of water passed through an instantaneous water heater. The flow device does not have a container for storing hot water. The efficiency of such a heater is determined by the number of liters per minute.

Please note that some instantaneous water heaters are designed for a single water outlet and you will not be able to take a shower if dishes are being washed in the kitchen at the same time. Therefore, in a family of several people, it is more reasonable to provide a model adapted for several water supply points.

• Place for installation. Storage water heaters will require dedicated space to be placed vertically on the wall or horizontally under the ceiling. Drains are more compact and can be built directly under the sink sink. Models with very large tanks will require floor mounting.
• Top or bottom water supply connection. Depending on the location of the water heater, a specific connection type may be preferable. For example, if you need to build a heater into a cabinet under the kitchen sink, top piping is more convenient.
• Ignition method. Automatic ignition will turn on the device when the tap is opened. Piezoelectric or battery-powered ignition will require pressing a button to light the burner to heat the gas boiler.
• Power. For a storage water heater, high power means a fast heating rate of the tank. In the case of an instantaneous water heater, this parameter is important for maintaining the normal flow rate of the heated liquid.

Keep in mind that high-power devices will require the installation of a dedicated circuit breaker in the distribution panel, and sometimes a three-phase connection.

• Installation and connection of the device. Many types of boilers can be installed independently due to their simple installation. Find out if the heater service warranty is still valid if you install it yourself. Otherwise, contact the professionals.

What details can you ignore when buying a water heater?

• Anti-scale function. Some manufacturers advertise models with reduced formation of mineral scale that forms at the bottom of the tank during boiling. Although mineralization shortens the life of the heating element, you should not overpay for the operation of this device.

The service life of the heating element is primarily determined by the hardness of the water. The higher the hardness, the more often the heater will require maintenance.

• Mechanical or electronic control. Heaters with mechanical buttons provide limited adjustments, but electronic panels are not always sensitive to pressure with wet fingers. Some models are equipped with a remote control.
• Digital screen. This part is accompanied by electronic control and displays the current water temperature. Some models allow you to set an economical flow mode and individual heating temperatures for each family member using a timer.
• Antibacterial internal coating of the tank. This is rather a marketing ploy for storage-type water heaters, since if water is stored in a tank for a long time without use, the liquid will bloom. Therefore, if the water heater is not used for a long time, it is recommended to drain the water from the tank.

The best instantaneous water heater

Electrolux NPX 8 Flow Active– an electric flow model that provides water to several points. Electronic control controls stable temperature even during pressure surges.

The heating element is made of stainless steel, insulated from water and does not form scale. The device is equipped with an overheat protection sensor. Provides automatic on/off and self-diagnosis function.

Vertical wall mounting with bottom connection is allowed. For control, 6 modes are used to control the power of the device; the thermometer displays water temperature readings on the liquid crystal screen.

Characteristics

• Water flow: 4.2 l/min.
• Size: 37 x 22.6 x 8.8 cm.
• Power: 8.8 kW.
• Heating temperature: 30–60 0 C.
• Weight: 2.5 kg.
• LCD screen.
• Touch control.

pros

• Easy installation and operation.
• Indication of temperature, power and pressure on the LCD screen.
• Light weight and dimensions.
• Anti-scale protection.

Minuses

• High price.
• It independently lowers the temperature when the power is reduced, but the reverse process is not automated and requires manual control.

Customer Reviews

The build quality and compactness of the device are noted. The device copes with its functions, quickly heats water and operates stably. However, you will need to provide a separate automatic switch for switching on; in rare cases, you need to restart the thermal relay.

The best horizontal water heater

Thermex Champion ER 80H Silverheat– a cumulative model of a round design. The heater is installed horizontally on the wall with a bottom pipe connection. Bioglass porcelain is used to cover the internal steel tank.

The model is equipped with a magnesium anode and single-phase power supply. The device is protected from overheating and has a limit on the temperature of the heated water.

Characteristics

• Tank volume: 80 l.
• Water flow: 3 l/min.
• Size: 44.5 x 80.3 x 45.9 cm.
• Power: 1.5 kW.
• Weight: 21.2 kg.

pros

• Easy installation and management.
• Economical in price and energy consumption.
• Capacious tank.
• Does not require a separate machine for connection.

Minuses

• Low power.
• The magnesium anode needs to be replaced every 1–2 years.
• There is no digital reading on the temperature indicator.

Customer Reviews

There is an optimal price-quality ratio and a large tank capacity. Horizontal placement allows this model to be installed in small bathrooms. It is easy to replace the anode yourself, but the heating indicator is not very informative.

The best water heater for a summer house

Bosch Therm 4000 O WR10-2P– a flow-through gas model that operates on liquefied or natural gas. The device is equipped with a vertical wall mount with a bottom pipeline connection.

The heater is equipped with automatic protection against overheating, a reverse draft sensor and flame control. The stainless steel burner operates even at low gas pressure. The service life of a copper heat exchanger is stated by the manufacturer to be 15 years.

The water heater provides good pressure and stable temperature even with low pressure in the water supply. The duration of continuous operation of the device is not limited.

Characteristics

• Heating temperature: 35–60 0 C.
• Power: 17.4 kW.
• Water flow: 10 l/min.
• Piezo ignition / battery ignition.
• Gas consumption: 2.1 cubic meters m/hour
• Operating pressure: 12 bar.
• Weight: 11 kg.
• Size: 31 x 58 x 22 cm.

pros

• Suitable for use with liquefied or natural gas.
• Two types of ignition are convenient for autonomous use.
• Compact dimensions.
• High power.
• Easy to maintain.

Minuses

• Poor water supply.
• High price.
• A separate machine for connection is required.

Customer Reviews

According to reviews, it is characterized as a reliable water heater of high-quality design. Easy to use, compact, stable and quiet. It heats water quickly, but due to its high power it is better to use a separate machine.

The device has adjustable temperature and good pressure, but requires the installation of wide hoses. There are complaints about the operation of the piezo ignition, which does not always work, and complaints about the weak heat exchanger.

The best water heater for a swimming pool

Pahlen Hi-Flow Titanium– a cylindrical heat exchanger with a spiral heating element, which is made of titanium and can be used in salt and chlorinated water. The kit includes fasteners made of stainless acid-resistant steel. The device is used for pools up to 300 square meters. m.

Characteristics

• Power: 75 kW.
• Size: 13.9 x 13.9 x 75.4 cm.
• Water flow: 45 l/min.
• Operating water temperature: 2–30 0 C.
• Heating temperature: 60–90 0 C.
• Weight: 2.9 kg.

pros

• Application in conditions of increased corrosion.
• Light weight and dimensions.

Minuses

• Recommendations for the quality of water must be followed.
• An external temperature sensor is required.

Customer Reviews

It is noted that horizontal and vertical installation of the device is acceptable provided it is filled with water. The heat exchanger comes in three power modes, which allows this model to be used for pools of different sizes.

Best water heater for shower

Timberk Primalux WHEL-3 OS– flow-through electric model for one collapsible point. The heater is installed on a wall with a bottom pipeline connection and is equipped with a copper heating element with a protective anti-corrosion coating.

An automatic sensor is triggered when water enters. The device is equipped with overheating protection and a filter for water purification. The package includes a shower head, cable with plug, and shower hose.

Characteristics

• Water flow: 1.9 l/min.
• Size: 27.2 x 15.9 x 11.2 cm.
• Power: 3.5 kW.
• Heating temperature: 60 0 C.
• Weight: 1.35 kg.

pros

• Easy installation and use.
• Small size and weight.
• No connection to a separate machine is required.
• Low cost.

Minuses

• Seasonal use in summer with a water temperature of at least 16 0 C.
• Low power.

Customer Reviews

The kit includes all parts required for mounting and installation. The device works stably when switching on/off, heats the water to a comfortable temperature, and operates quietly.

The compact heater is suitable for a small bathroom as it does not require much space. It is noted that the cord included in the kit is short, and with low water pressure problems with heating are detected.

The best water heater for the kitchen

AEG MP 8 is a flow-through electric pressure type model with a bottom water supply connection. The design includes two heating elements in a copper flask with anti-scale coating. Electronic control is provided.

The device automatically turns on and off, the power is adjusted depending on the water supply. The device is equipped with overheating protection and can supply multiple points. The control unit is cooled with water.

Characteristics

• Operating pressure: 10 bar.
• Power: 8 kW.
• Size: 36 x 21 x 9.5 cm.
• Heating temperature: 38 0 C.
• Water flow: 5.7 l/min.
• Weight: 2.4 kg.

pros

• Small size and weight.
• High power.

Minuses

• High price.
• A separate machine for connection is required.
• Low heating temperature.

Customer Reviews

This is a powerful water heater of a compact size that can be easily integrated into a technological niche. A reliable device that copes with the task of heating water; the heating temperature is sufficient for household needs for use in the kitchen. Among the disadvantages, unregulated power is noted.

The best water heater for a bathroom

Stiebel Eltron HFA/EB 80 Z– accumulative electric model of pressure type. The device is equipped with a copper heating element and a replaceable magnesium anode with anti-corrosion coating. The tank is thermally insulated, the inner tank is 2 mm thick and covered with enamel with a layer of 0.4 mm.

There is a button for quick heating of water, protection against freezing and overheating. The heating mode can be set to dual-tariff mode to use electricity at a preferential rate. It is possible to use several water distribution points.

Characteristics

• Volume: 80 l.
• Heating temperature: 35–82 0 C.
• Power: 2–6 kW.
• Size: 41 x 102 x 42 cm.
• Operating pressure: 6 atm.
• Weight: 36 kg.

pros

• High power.
• The maximum heating temperature is higher than many other models.

Minuses

• High price.
• Large dimensions.
• Safety and check valves must be purchased separately for safe operation of the device.

Customer Reviews

This is a reliable heater with a good design. It is fully automated and does not require supervision. No complicated installation required. The device heats water quickly and is convenient to use in economy mode. The power for accelerated water heating is rated as optimal.

The best storage water heater

Timberk Pafoss SWH FSL1 50V– a storage electric model that connects to several water collection points. The device is equipped with protection against overpressure, overheating and dry heating. The design uses a magnesium anode; the internal tank, 1.2 mm thick, is made of stainless steel.

The water heater is mounted vertically on the wall with a bottom water supply. The tank is equipped with thermal insulation and does not heat up during use. Maintenance and repairs are possible with the water supply connected.

Characteristics

• Tank volume: 50 l.
• Water consumption: 13 l/min.
• Power: 2 kW.
• Size: 87.5 x 43.5 x 23.8 cm.
• Heating temperature: 75 0 C.
• Weight: 13.4 kg.

pros

• No separate machine required.
• Capacious tank.
• Acceptable price.

Minuses

• Low power.
• Large dimensions.

Customer Reviews

The device copes well with the task of heating water. Large tank capacity suitable for two people. The high-quality assembly is not satisfactory. The model is easy to use and does not heat up during use.

The best flat water heater

Thermex Flat Diamond Touch ID 100V– electric storage model of flat design. The heater is installed vertically on the wall with a bottom water supply and can supply several taps with water. The internal tank is made of stainless steel, the anode is magnesium.

Accelerated heating of water is provided. The model is equipped with a timer that sets the heating time, and a liquid crystal display for electronic control and temperature display.

Characteristics

• Volume: 100 l.
• Size: 124.5 x 49.3 x 27 cm.
• Power: 1.3–2 kW.
• Heating temperature: 75 0 C.
• Weight: 25.2 kg.

pros

• Capacious tank.
• Flat body design.
• Easy installation.

Minuses

• An adapter is required between the model pipe and the water pipes.
• Internal structural elements require annual replacement.
• Low power.

Customer Reviews

The flat body allows it to be compactly integrated into a room of limited size. Pressing buttons on the control panel is duplicated by sound. The timer can only be set for one time.

There are complaints about the correct display of water temperature on the device indicator and the quality of the heating elements, which need to be replaced regularly. Fingerprints are visible on the shiny case.

The best water heater with a dry heating element

Electrolux EWH 80 Formax DL– storage electric model. The internal tank is treated with anti-corrosion glass enamel coating. The device is equipped with electronic control and two independent heating elements of a special dry design that are not in contact with water. The heating elements are insulated with a metal casing; if one heating element malfunctions, the second will continue to operate.

The model can be installed vertically or horizontally if necessary, which makes it universal for use in any room. The device is equipped with a special function for programming three temperature values.

An economical mode of operation of the heater is provided, in which the water temperature is limited to 55 degrees. There is protection against overpressure and overheating. The external tank is thermally insulated with a layer of polyurethane foam 22 mm thick.

Characteristics

• Tank volume: 80 l.
• Power: 0.8–2 kW.
• Heating temperature: 30–75 0 C.
• Weight: 27.5 kg.
• Size: 72.9 x 45.4 x 46 cm.

pros

• Horizontal and vertical installation.
• When the power is turned off, the individual settings are saved until the next time you turn it on.
• Three power levels.
• No separate machine is required for connection.

Minuses

• Large dimensions.
• Confusing electronic controls.

Electric water heaters (boilers) are in active demand among Russians. With the presence of a water heater, the dependence on the general supply of hot water completely disappears, although electricity bills increase. Modern boilers maintain high temperatures for a long time and cope with constant loads. Our boiler rating 2018 will tell you how to choose the best boiler.

A boiler is a storage tank for heating water. The main classification is carried out according to types of heating:

• external– consists of using thermal energy from the combustion of wood, coal or gas. Boilers with external heating include:
  • gas - storage boilers operating on the principle of gas combustion;
  • combined– work on a gas heater and heating element simultaneously.
• interior– water is heated using a heating element immersed over its entire length, in which a heating liquid circulates. Among the boilers with internal heating type are:
• electric- storage boilers, similar in principle to gas boilers - water is heated in the tank to a certain temperature and then maintained inside thanks to a thermal insulation system. It works on the basis of a heating element, a thermostat and a magnesium anode, which prevents the formation of scale.
• indirect heating– the boiler is heated by the general heating system.
• flow-through– the least economical water heaters on the list. They usually cut into the water supply system itself and instantly heat the water passing through the heating element. They have no restrictions on the supply of hot water, unlike storage boilers.
• combined– work on the basis of a gas heater and heating element simultaneously.

The water in the boiler is supplied from below and heated in layers. The topmost layer is the hottest, the bottom is, accordingly, the coldest. Boilers are also classified according to the type of installation:

• floor;
• wall-mounted

Each variety has a number of pros and cons. Our rating presents storage electric wall-mounted boilers that can bring warmth to your home.

In order to make your choice and choose the best option for you, you should first take into account the standard requirements for a water heater. Among them:

Volume of the tank– fundamental selection criterion. For 1 person, a boiler with a volume of 30-50 liters should be installed, for 2 people, you should choose a boiler for 50-80 liters, for 3 people - 80-100 liters, for 4 people - 100-120 liters, and for 5 people families - 120-150 liters.

Tank power– storage heaters consume 1-2.5 kW per day. With a power of 1.5 kW, 100 liters of water are heated in 3-5 hours. The higher the power, the shorter the heating time, but the bills for consumed electricity increase.

Internal coating:

• stainless steel– this material inspires confidence in the user: the inside of the tank will not rust or rot, which means it will last a long time. Stainless steel coated tanks have a warranty of over 10 years. Thanks to the simple production process, stainless steel tanks are cheaper than their enameled counterparts, but are more prone to scale formation and internal contamination.
• enamel - despite the initially slightly biased attitude, enamel is in no way inferior and performs to some extent better than stainless steel. Very often, the inside of the tank is coated with titanium or antibacterial silver-plated enamel, which can withstand temperatures up to 1200 °C, repels scale and promotes uniform and rapid heating.

Boiler shape:

• cylindrical - the most common models on the Russian household appliances market;
• Slim boilers – cylindrical models reduced in diameter;
• rectangular - compact, comfortable boilers for placement in small spaces. They are considered the most heat-retaining and energy-efficient.

Control type:

• mechanical - control is carried out using rotary controls. This type is simple, understandable and used in simplified models;
• electronic – controlled using an LED display and buttons. Has the ability to self-learn, remembering your choices. Models with this type of control have a more reliable protection system and a rich selection of additional parameters.

Rating of the best boilers - 2019

5th place: Edisson ER 80V (4930 rubles)

The main advantage of this storage type water heater is its low price. Wherever you install it: at home or in the country, this economical boiler will come in handy everywhere. Edisson ER 80V has a large displacement (80 liters), so it can compete with more expensive devices.

Technical specifications:

• Type: cumulative;
• Heating: electric;
• Volume: 80 l;
• Control type: mechanical;
• Display: no;
• Dimensions: 450×800×460 mm;
• Weight: 23 kg;
• Heating element: heating element;
• Heating element power: 1.5 kW.

Extra options:

• pressure (several water intake points);
• check valve;
• glass-ceramic interior coating;
• 1 magnesium protective anode;
• vertical installation;
• inlet pressure: from 0.50 to 6 atmospheres;
• power-on indication;

Pros:

• low cost;
• heats up quickly;
• well assembled;
• high-quality check valve;
• Manufacturer's warranty – 1 year.

Minuses:

• inconvenient temperature adjustment;
• mechanical;
• turns on frequently;
• no water temperature indicator;
• low degree of protection against electric shock;
• after three years of use there is a slight water leak;
• simple design.

4th place: Polaris Omega 80V (11,350 rubles)

Storage water heater with an attractive price/quality ratio. Heats water to maximum temperature quite quickly (in about 1.5 hours), very easy to operate. A protective differential switch RCD is provided.

Technical specifications:

• Type: cumulative;
• Heating: electric;
• Volume: 80 l;
• Control type: electronic;
• Display: yes;
• Dimensions: 530×870×300 mm;
• Weight: 17 kg;
• Heating element: heating element;
• Number of heating elements: 1 pc.;
• Heating element power: 2 kW.

Extra options:

• overheat protection;
• safety valve;
• several points (pressure);
• internal coating of the tank made of stainless steel;
• 1 magnesium protective anode;
• vertical installation;
• wall mount and bottom connection;
• inlet pressure up to 7 atmospheres;
• power-on indication;
• heating indication;
• thermometer;
• heating temperature limitation.

Pros:

• price-quality ratio;
• volume;
• quickly heats the entire volume of water;
• there is an RCD;
• economical;
• there is protection against overheating;
• Ease of Management;
• compact;
• easy;
• beautiful appearance.

Minuses:

• high price;
• short warranty period from the manufacturer.

3rd place: Gorenje OTG 80 SL B6 (from RUB 8,229)

A boiler with two copper heating elements and mechanical control quickly heats water and withstands constant power surges. Ideal for the user who needs “fast and reliable”.

Technical specifications:

• Type: cumulative
• Heating: electric
• Volume: 80 l
• Maximum heating temperature: +75°C
• Control type: mechanical
• Dimensions: 420×950×445 mm
• Heating element: heating element
• Number of heating elements: 2 pcs
• Heating element power: 1 kW (220 W) each

Extra options:

• reliable protection against water leaks;
• enamel coating;
• 1 magnesium protective anode;
• vertical installation;
• wall mount and bottom connection;
• inlet pressure 6 atmospheres;
• power-on indication;
• thermometer;
• Anti-freeze mode;
• overheat protection and
• safety valve;
• accelerated water heating;
• heating time to maximum temperature is 3 hours.

Pros:

• high thermal insulation;
• works silently;
• reliability and European quality;
• affordable price;
• two heating elements and fast water heating;
• increased level of security.

Minuses:

• poor quality safety valve (water leaks);
• long time of maximum heating;
• high energy consumption.

2nd place: Ariston ABS VLS EVO PW 80 D (12,510 rubles)

This model takes 2nd place in the ranking, as it has two heating elements and a large displacement; wide functionality of electronic control and active electrical protection ABS 2.0. The manufacturer notes the special proprietary coating of the internal tank AG+ and the “ECO” economical mode function. In addition, the water heater has a high degree of protection against water - class 4 according to the European standard. The flat design and the possibility of vertical or horizontal mounting make this model convenient for any room.

Technical specifications:

• Type: cumulative;
• Heating: electric;
• Volume: 80 l;
• 2 internal tanks;
• Maximum heating temperature: +80°C;
• Control type: electronic;
• Display: yes;
• Dimensions: 506×1066×275 mm;
• Weight – 27 kg;
• Heating element: heating element;
• Number of heating elements: 2 pcs.;
• Power of heating elements: 2.5 kW.

Extra options:

• protection against water leaks;
• protection against electric shock (RCD);
• protection against switching on without water;
• several water intake points (pressure);
• AG+ coating;
• active electrical protection;
• vertical or horizontal installation;
• wall mount and bottom connection;
• inlet pressure: from 0.20 to 8 atmospheres;
• power-on indication;
• heating indication;
• thermometer;
• heating temperature limitation;
• “accelerated heating” mode.

Pros:

• large volume of water;
• 2 heating elements,
• There is an accelerated heating mode,
• Possibility to install vertically or horizontally,
• good protection
• a sufficiently large water container with external compactness;
• ease of use,
• modern design,
• efficiency,
• high build quality,
• informative display.

Minuses:

• high price.

1st place: Electrolux EWH 80 Royal Silver (from RUB 13,490)

A boiler from Electrolux - the best ratio of price, technical characteristics and design - is chosen by many Russian users due to its affordable price, good service, long warranty and a set of all parameters necessary for comfortable use.

Technical specifications:

• Type: cumulative
• Heating: electric with heat pump
• Volume: 80 l
• Maximum heating temperature: +75°C
• Control type: mechanical
• Display: yes
• Dimensions: 433×860×255 mm
• Heating element: heating element
• Number of heating elements: 1 piece
• Heating element power: 2 kW (220 W)

Extra options:

• reliable protection against water leaks;
• stainless steel coating;
• 1 magnesium protective anode;
• vertical installation;
• wall mount and bottom connection;
• inlet pressure 0.7-6 atmospheres;
• power-on indication;
• thermometer;
• safety valve;
• heating temperature limitation;
• overheating protection and protection against turning on without water;
• auto mode, vacation mode;
• accelerated heating mode;
• antibacterial protection;
• maximum water heating time – 70 minutes.

Pros:

• easy to assemble and connect;
• easy to operate;
• heats water very quickly;
• high thermal insulation properties - when switched off, it maintains a high temperature for up to 3 days;
• decent design;
• low price with high build quality.

Minuses:

• poor quality check valve (needs to be replaced).

Let's sum it up

A traditional replacement for a boiler in the absence of a centralized hot water supply is, of course,. However, to install it correctly (from the point of view of documents) you will have to put in more effort.

Undemanding Russian users choose inexpensive models with a mechanical control type, standard functionality and an internal stainless steel coating. Most models with electronic control type have an enamel internal coating, are equipped with advanced parameters and are chosen by progressive users.

Updated January 2019

Electric storage water heaters have become widespread. Oddly enough, many houses, especially in small towns and villages, are still not connected to hot water supply systems. Needless to say, even in big cities hot water is often supplied with problems. That's why consumers have chosen boilers as a reliable and inexpensive solution for organizing uninterrupted water supply. In this review, we will rank storage water heaters based on reliability and identify the most popular brands and models.

In our review we will touch on the products of five brands:

• Thermex;
• Ariston;
• Bosch;
• Gorenje;
• Electrolux.

We will also mention Drazice brand products.

When compiling a rating of electric storage water heaters, we will place the most popular brand in first place, and the last place will be taken by the brand whose products are the least in demand. We will use customer preferences and reviews as a guide. The leader of the rating is the Ariston brand. On the market you will also find a wide selection of Ariston gas water heaters.

The Italian brand Ariston produces the best water heating equipment - reliable, durable, safe and efficient. Potential buyers have dozens of models to choose from, but only a few of them have become leaders in their segment. In the process of creating instantaneous water heaters, Ariston uses the most advanced technologies and advanced materials, which allows it to achieve the best results and create reliable equipment. Here is a list of popular models:

• Ariston ABS VLS PW 50 is a leader in the list of small-sized models with small capacity;
• Ariston ABS PRO R 100V is a good model for 100 liters of water;
• Ariston ABS PRO ECO PW 150V is one of the most spacious household models.

In the rating of water heaters, Ariston ABS VLS PW 50 took first place as the most reliable and affordable model. The device holds 50 liters of water and is equipped with two heating elements with a total power of 2.5 kW. A notable feature of the water heater is the presence of an option for accelerated heating of water - it can heat up by 45 degrees in just 46 minutes. Electronic control is used here, there is electronic protection, and the “ECO” function. Tank material – stainless steel. An excellent device with an attractive design and a flat body.

The Ariston ABS PRO R 100V water heater is equipped with an advanced tank with excellent corrosion protection. We can say that this is one of the most durable models. The tank capacity is 100 liters, it uses electronic control, has a thermometer and a self-diagnosis system. There are also all the necessary security systems and protection against bacteria. An excellent device for those who need a lot of hot water.

The Ariston ABS PRO ECO PW 150V model has a capacity of 150 liters. It is equipped with a tank with antibacterial protection and additional corrosion protection (AG+). The control system used is electronic, the number of heating elements is 2 (you can adjust the power), there is an accelerated heating function. The kit includes a protective shutdown device. Water is heated in 3 hours 10 minutes.

Thermex storage water heaters

In the ranking of storage water heaters in terms of reliability, the second place was taken by products of the Thermex brand. The leader of the model range is the Thermex Flat Plus IF 50V model. The device has a capacity of 50 liters, and the tank itself is enclosed in a thin body with an attractive design. The boiler will be useful for those who like beautiful equipment that does not take up space. The power of the water heater is 2 kW, the control is electronic, the tank is made of stainless steel. Also in the list of leaders you can include a similar model Thermex Flat Plus IF 80V with a tank of 80 liters.

Among the more spacious models, we can highlight the Thermex Champion ER 100V storage water heater. It has a capacity of 100 liters and is equipped with simple hydraulic controls. The tank in this model has a glass-ceramic coating and is equipped with protection in the form of a magnesium anode. True, a 1.5 kW heating element is still not enough for such a capacious tank.

Storage water heaters Gorenje

The Slovenian company Gorenje took third place in our ranking. The most popular representative of small-sized storage water heaters is the Gorenje GBFU 50 model. The device is equipped with a 2 kW heating element, simple mechanical controls, protection against overheating and freezing, an enamel-coated tank and a thermometer. Installation in a horizontal position is allowed. This is a simple but reliable water heater.

Among the spacious models, the clear leader is the Gorenje GBFU 100 EB6 storage water heater. In terms of its characteristics, this device is similar to the previous model. The exception is the capacity of the boiler - its tank capacity is 100 liters. A good water heater for intensive water consumption.

Do you need an inexpensive and reliable designer model? To do this, we included an interesting model Gorenje OTG 50 SLSIMB6/SLSIMBB6 in the rating of storage water heaters. This device is made in a stylish rectangular black case with rounded edges. The tank capacity is 50 liters, on board there is a safety valve, overheating protection, freezing protection, a magnesium anode and a power indicator. Mounting method is vertical only.

There is also a similar model on the market with a larger tank for 100 liters of water. Other characteristics are the same as the 50 liter model.

Electrolux storage water heaters

The rating of the best water heaters includes models from Electrolux - they are in fourth place in the list of leaders. Many devices from this brand are dressed in flat cases with an excellent, strict design. The leader of the model range is the Electrolux EWH 50 Royal storage water heater. Its advantages are a stainless steel tank and the presence of accelerated water heating. On the front panel there is a power indicator, a thermometer and a temperature controller. The power of the heating element is 2 kW.

On the same level as the above model are the Electrolux EWH 30 Royal, Electrolux EWH 80 Royal and Electrolux EWH 100 Royal water heaters - they differ in tank capacity (indicated in the numerical index in the name of the models).

Among the simplest water heaters, we can highlight the Electrolux EWH 50 AXIOmatik Slim model for 50 liters. This model has a corrosion-protected heating element with a 15-year warranty, a multi-stage safety system, a magnesium anode and a convenient control panel. Notable is the “ECO” operating mode - in this mode the water is heated to +55 degrees, which ensures the safety of the heating element and gets rid of bacteria. The tank of the model is made of stainless steel, the power of the heating element is 1.5 kW.

Among the designer models, we will highlight the Electrolux EWH 50 Formax water heater. This model is designed to heat 50 liters of water and is equipped with overheating protection, heating limitation and a convenient control panel. The water heater is made in a rectangular body with rounded corners; it can be mounted both vertically and horizontally.

Storage water heaters Bosch

The rating of the best electric water heaters also includes models from Bosch. The most popular here are the capacious boilers Bosch WSTB 160C, Bosch WSTB 200C and Bosch WSTB 300C. Their capacity is 156, 197 and 297 liters, respectively. These are indirect heating boilers, and they are designed to work as part of heating systems.

Among electric storage water heaters, we can distinguish the following models:

• Bosch Tronic 4000T/ES 075-5 M 0 WIB-B;
• Bosch Tronic 4000T/ES 060-5 M 0 WIB-B;
• Bosch Tronic 1000T/ES 030-5 N 0 WIB-B.

The first two models are identical, except for the tank capacity - the first is designed for 75 liters, and the second for 60 liters. The power of the heating elements used is 2 kW, the tanks are made using glass-ceramic coating. Inside we will find magnesium anodes, protection against overheating and freezing, as well as safety valves. The design uses simple controls, without the use of electronics.

As for the Bosch Tronic 1000T/ES 030-5 N 0 WIB-B storage water heater, it is a relatively simple boiler with a capacity of 50 liters and a 1.5 kW heating element. The internal coating of the tank is made of glass ceramics, and the device itself is supplemented with a safety valve and a magnesium anode for protection against corrosion. There is also a simple mechanical thermometer on board.

Other water heaters

Undoubtedly, models from other manufacturers could also be included in the rating of storage water heaters. But users make their choice in favor of the above-mentioned devices. We would include Drazice brand products in the rating. These are worthy devices, characterized by the highest reliability and longevity. But the level of their distribution in Russia is minimal. Therefore, the undisputed leaders in the ranking of the best electric water heaters are the Ariston, Thermex and Gorenje brands.