Electric water heaters (boilers) are in active demand among Russians. With the presence of a water heater, the dependence on the general supply of hot water completely disappears, although electricity bills increase. Modern boilers maintain high temperatures for a long time and cope with constant loads. Our boiler rating 2018 will tell you how to choose the best boiler.

A boiler is a storage tank for heating water. The main classification is carried out according to types of heating:

• external– consists of using thermal energy from the combustion of wood, coal or gas. Boilers with external heating include:
  • gas - storage boilers operating on the principle of gas combustion;
  • combined– work on a gas heater and heating element simultaneously.
• interior– water is heated using a heating element immersed over its entire length, in which a heating liquid circulates. Among the boilers with internal heating type are:
• electric- storage boilers, similar in principle to gas boilers - water is heated in the tank to a certain temperature and then maintained inside thanks to a thermal insulation system. It works on the basis of a heating element, a thermostat and a magnesium anode, which prevents the formation of scale.
• indirect heating– the boiler is heated by the general heating system.
• flow-through– the least economical water heaters on the list. They usually cut into the water supply system itself and instantly heat the water passing through the heating element. They have no restrictions on the supply of hot water, unlike storage boilers.
• combined– work on the basis of a gas heater and heating element simultaneously.

The water in the boiler is supplied from below and heated in layers. The topmost layer is the hottest, the bottom is, accordingly, the coldest. Boilers are also classified according to the type of installation:

• floor;
• wall-mounted

Each variety has a number of pros and cons. Our rating presents storage electric wall-mounted boilers that can bring warmth to your home.

In order to make your choice and choose the best option for you, you should first take into account the standard requirements for a water heater. Among them:

Volume of the tank– fundamental selection criterion. For 1 person, a boiler with a volume of 30-50 liters should be installed, for 2 people, you should choose a boiler for 50-80 liters, for 3 people - 80-100 liters, for 4 people - 100-120 liters, and for 5 people families - 120-150 liters.

Tank power– storage heaters consume 1-2.5 kW per day. With a power of 1.5 kW, 100 liters of water are heated in 3-5 hours. The higher the power, the shorter the heating time, but the bills for consumed electricity increase.

Internal coating:

• stainless steel– this material inspires confidence in the user: the inside of the tank will not rust or rot, which means it will last a long time. Stainless steel coated tanks have a warranty of over 10 years. Thanks to the simple production process, stainless steel tanks are cheaper than their enameled counterparts, but are more prone to scale formation and internal contamination.
• enamel - despite the initially slightly biased attitude, enamel is in no way inferior and performs to some extent better than stainless steel. Very often, the inside of the tank is coated with titanium or antibacterial silver-plated enamel, which can withstand temperatures up to 1200 °C, repels scale and promotes uniform and rapid heating.

Boiler shape:

• cylindrical - the most common models on the Russian household appliances market;
• Slim boilers – cylindrical models reduced in diameter;
• rectangular - compact, comfortable boilers for placement in small spaces. They are considered the most heat-retaining and energy-efficient.

Control type:

• mechanical - control is carried out using rotary controls. This type is simple, understandable and used in simplified models;
• electronic – controlled using an LED display and buttons. Has the ability to self-learn, remembering your choices. Models with this type of control have a more reliable protection system and a rich selection of additional parameters.

Rating of the best boilers - 2019

5th place: Edisson ER 80V (4930 rubles)

The main advantage of this storage type water heater is its low price. Wherever you install it: at home or in the country, this economical boiler will come in handy everywhere. Edisson ER 80V has a large displacement (80 liters), so it can compete with more expensive devices.

Technical specifications:

• Type: cumulative;
• Heating: electric;
• Volume: 80 l;
• Control type: mechanical;
• Display: no;
• Dimensions: 450×800×460 mm;
• Weight: 23 kg;
• Heating element: heating element;
• Heating element power: 1.5 kW.

Extra options:

• pressure (several water intake points);
• check valve;
• glass-ceramic interior coating;
• 1 magnesium protective anode;
• vertical installation;
• inlet pressure: from 0.50 to 6 atmospheres;
• power-on indication;

Pros:

• low cost;
• heats up quickly;
• well assembled;
• high-quality check valve;
• Manufacturer's warranty – 1 year.

Minuses:

• inconvenient temperature adjustment;
• mechanical;
• turns on frequently;
• no water temperature indicator;
• low degree of protection against electric shock;
• after three years of use there is a slight water leak;
• simple design.

4th place: Polaris Omega 80V (11,350 rubles)

Storage water heater with an attractive price/quality ratio. Heats water to maximum temperature quite quickly (in about 1.5 hours), very easy to operate. A protective differential switch RCD is provided.

Technical specifications:

• Type: cumulative;
• Heating: electric;
• Volume: 80 l;
• Control type: electronic;
• Display: yes;
• Dimensions: 530×870×300 mm;
• Weight: 17 kg;
• Heating element: heating element;
• Number of heating elements: 1 pc.;
• Heating element power: 2 kW.

Extra options:

• overheat protection;
• safety valve;
• several points (pressure);
• internal coating of the tank made of stainless steel;
• 1 magnesium protective anode;
• vertical installation;
• wall mount and bottom connection;
• inlet pressure up to 7 atmospheres;
• power-on indication;
• heating indication;
• thermometer;
• heating temperature limitation.

Pros:

• price-quality ratio;
• volume;
• quickly heats the entire volume of water;
• there is an RCD;
• economical;
• there is protection against overheating;
• Ease of Management;
• compact;
• easy;
• beautiful appearance.

Minuses:

• high price;
• short warranty period from the manufacturer.

3rd place: Gorenje OTG 80 SL B6 (from RUB 8,229)

A boiler with two copper heating elements and mechanical control quickly heats water and withstands constant power surges. Ideal for the user who needs “fast and reliable”.

Technical specifications:

• Type: cumulative
• Heating: electric
• Volume: 80 l
• Maximum heating temperature: +75°C
• Control type: mechanical
• Dimensions: 420×950×445 mm
• Heating element: heating element
• Number of heating elements: 2 pcs
• Heating element power: 1 kW (220 W) each

Extra options:

• reliable protection against water leaks;
• enamel coating;
• 1 magnesium protective anode;
• vertical installation;
• wall mount and bottom connection;
• inlet pressure 6 atmospheres;
• power-on indication;
• thermometer;
• Anti-freeze mode;
• overheat protection and
• safety valve;
• accelerated water heating;
• heating time to maximum temperature is 3 hours.

Pros:

• high thermal insulation;
• works silently;
• reliability and European quality;
• affordable price;
• two heating elements and fast water heating;
• increased level of security.

Minuses:

• poor quality safety valve (water leaks);
• long time of maximum heating;
• high energy consumption.

2nd place: Ariston ABS VLS EVO PW 80 D (12,510 rubles)

This model takes 2nd place in the ranking, as it has two heating elements and a large displacement; wide functionality of electronic control and active electrical protection ABS 2.0. The manufacturer notes the special proprietary coating of the internal tank AG+ and the “ECO” economical mode function. In addition, the water heater has a high degree of protection against water - class 4 according to the European standard. The flat design and the possibility of vertical or horizontal mounting make this model convenient for any room.

Technical specifications:

• Type: cumulative;
• Heating: electric;
• Volume: 80 l;
• 2 internal tanks;
• Maximum heating temperature: +80°C;
• Control type: electronic;
• Display: yes;
• Dimensions: 506×1066×275 mm;
• Weight – 27 kg;
• Heating element: heating element;
• Number of heating elements: 2 pcs.;
• Power of heating elements: 2.5 kW.

Extra options:

• protection against water leaks;
• protection against electric shock (RCD);
• protection against switching on without water;
• several water intake points (pressure);
• AG+ coating;
• active electrical protection;
• vertical or horizontal installation;
• wall mount and bottom connection;
• inlet pressure: from 0.20 to 8 atmospheres;
• power-on indication;
• heating indication;
• thermometer;
• heating temperature limitation;
• “accelerated heating” mode.

Pros:

• large volume of water;
• 2 heating elements,
• There is an accelerated heating mode,
• Possibility to install vertically or horizontally,
• good protection
• a sufficiently large water container with external compactness;
• ease of use,
• modern design,
• efficiency,
• high build quality,
• informative display.

Minuses:

• high price.

1st place: Electrolux EWH 80 Royal Silver (from RUB 13,490)

A boiler from Electrolux - the best ratio of price, technical characteristics and design - is chosen by many Russian users due to its affordable price, good service, long warranty and a set of all parameters necessary for comfortable use.

Technical specifications:

• Type: cumulative
• Heating: electric with heat pump
• Volume: 80 l
• Maximum heating temperature: +75°C
• Control type: mechanical
• Display: yes
• Dimensions: 433×860×255 mm
• Heating element: heating element
• Number of heating elements: 1 piece
• Heating element power: 2 kW (220 W)

Extra options:

• reliable protection against water leaks;
• stainless steel coating;
• 1 magnesium protective anode;
• vertical installation;
• wall mount and bottom connection;
• inlet pressure 0.7-6 atmospheres;
• power-on indication;
• thermometer;
• safety valve;
• heating temperature limitation;
• overheating protection and protection against turning on without water;
• auto mode, vacation mode;
• accelerated heating mode;
• antibacterial protection;
• maximum water heating time – 70 minutes.

Pros:

• easy to assemble and connect;
• easy to operate;
• heats water very quickly;
• high thermal insulation properties - when switched off, it maintains a high temperature for up to 3 days;
• decent design;
• low price with high build quality.

Minuses:

• poor quality check valve (needs to be replaced).

Let's sum it up

A traditional replacement for a boiler in the absence of a centralized hot water supply is, of course,. However, to install it correctly (from the point of view of documents) you will have to put in more effort.

Undemanding Russian users choose inexpensive models with a mechanical control type, standard functionality and an internal stainless steel coating. Most models with electronic control type have an enamel internal coating, are equipped with advanced parameters and are chosen by progressive users.

Updated January 2019

A storage water heater is an essential element of any modern home. It is impossible to feel comfortable without constant access to hot water. We are not talking about a large bath of hot water or a contrast shower; even everyday dusting involves the use of warm water.

The modern selection of such devices is quite wide. Affordable pricing for water heating devices makes them popular. But every year better models come out, which will be discussed further. And the following rating will help the user choose a water heater with parameters that suit each one.

A boiler that is widely popular among users. Such models are bought all over the world. The ideal combination of price, quality and functionality puts it in first place among storage water heaters. This device copes faster than others with heating water with a volume of up to 80 liters.

The device has a high degree of protection; it is not scary to leave it turned on at home. High-quality automation will turn off the device in case of violation of the operating mode. The design of the model is simple, made in a calm home style without sharp corners.

Fast heating of water is ensured through the operation of two heating elements, and the total power of the device is 2000 W. With such power, the device uses energy sparingly and provides fast water heating. In order to bring the water in the tank to 75 degrees, the device will require no more than 185 minutes.

Protection is installed: safety and check valves, as well as a thermostat that prevents both overheating and freezing of water.

The internal surface of the device has an enamel coating that prevents corrosion.

The water heater is controlled via a mechanical switch. For the operation of the device, no constant adjustment is required; it is enough to determine the operating mode once.

The weight of the water heater is 27 kg, which does not create additional load on the wall. But it should be borne in mind that with a full tank the device will weigh much more.

In addition to all the above positive qualities, the manufacturer’s warranty is 1 year. The pricing policy of the device starts from 11,270 rubles. The volume and functionality of the water heater is suitable for both an average family and a small enterprise.

A representative from the not very popular, but fairly high-quality manufacturer Thermex. The device is popular for its accelerated operating mode, which allows you to heat water in a matter of moments. In this mode, the device operates at full power, which not only reduces the water heating time, but also increases energy consumption. Both the functions of the device and its design are good.

The inner surface of the water heater tank is made of glass-ceramic material, which increases the service life of the device and prevents corrosion.

Additional protective functions and elements are available. The magnesium anode does not allow corrosion to occur, which significantly extends the service life of parts. The temperature limiter prevents the device from overheating the water. A safety valve is also installed, the main function of which is to remove excess pressure from the tank. The device is safe and it is not scary to leave it turned on at home.

There is one heating element that can operate in different operating modes. In high power mode, the device heats water very quickly while consuming more energy. The power of the water heater is 2500 W.

In addition to the listed features, these boilers use a simple design and are designed for long-term operation. It can be used both in the family and in a company or office; the internal tank volume of 80 liters is quite enough for this.

The pricing policy of Thermex Sprint 80 SPR-V starts from 12,270 rubles. In addition to the affordable price, the manufacturer provides a 1-year warranty on the electrical components of the device and a 3-year warranty on the integrity of the tank, which is made of stainless steel.

No less well-known manufacturer of household appliances, Ariston, presents its ABS BLU R 80V model. When choosing a high-quality boiler, you should choose this device. Ideal dimensions make the water heater compact, but very spacious, its internal volume is 80 liters.

This storage electric boiler slowly but surely copes with its task. Due to one heating element, the water in the tank heats up slowly, but this slowness is compensated by low energy costs. Ariston also created this model to achieve an ideal price-quality ratio, so the water heater is affordable and of high quality.

The boiler power is only 1500 W. Sometimes this may not seem enough to ensure rapid heating of water with a volume of 80 liters. In order to bring the water temperature to 75 degrees, the device will require 3.06 hours. But such power allows you to significantly save energy during constant operation.

The tank is made of high-quality metal, the seams are welded using Micro Plazma Tig technology. This allows you to increase the service life of the device. Also, the strength of the tank is tested at a pressure of 16 atmospheres, this allows you to identify all defects in a timely manner and eliminate the appearance of defective products.

An enlarged magnesium anode is installed. This element allows you to make the service life of some parts longer.

The thermal insulation shell is made of high-quality polyurethane foam, which does not allow the tank to heat up even when the water reaches its maximum temperature.

The Nanomix safety valve ensures that excess pressure is removed. An ABS protective system is also installed.

With an average internal volume and small dimensions, the weight of the boiler without a full tank is 22 kg. It doesn't take up much space and its simple design will look good in any room.

The main distinguishing feature of this device is its pricing policy, which starts at 6,790 rubles. Despite its availability, the device has negative reviews regarding the quality of the tank.

The maximum number of additional functions and elements allows this device to stand out from a number of similar boilers. Atlantic Steatite Cube Slim does not have an increased volume, as it is divided into two types according to capacity: 50 liters and 30 liters. But ideal for a small family or medium office. In addition, the small volume is compensated by expanded functionality and a long service life.

The water heater is compact in size and will not take up much space. It also has a degree of protection IP 24, which allows it to be installed even in the bathroom.

A steatite heating element was installed. This design and material of the element guarantees its long service life. The power of the device is 2100 W.

A high-precision capillary thermostat is available, which provides energy savings of up to 15%.

Very dense thermal insulation is made of environmentally friendly material - polyurethane foam. At maximum heating, the device releases heat slowly.

The inner surface of the tank has an enamel coating with the addition of zirconium. These materials ensure no corrosion and a long service life.

Cold and hot water pipes are made of high quality stainless steel.

The device includes a power supply cable, a safety valve and a dielectric coupling.

The price for an electric storage boiler starts from 12,370 rubles. Such versatility and high-quality components, combined with the price, make the device extremely popular and popular.

A good budget model designed to provide users with a long service life. There are basic protective functions, the energy consumption of the device is quite economical.

Protection against electric shock is installed if voltage enters the device body. There is also a function that turns off the device if the rated water temperature is exceeded and if the pressure is too high. The main novelty of Haier Es50v-R1(H) can be called protection against dry heating.

The magnesium anode of the device has an enlarged design, which makes its service life longer.

When collecting liquid, the technology of uniform distribution of cold water is used. This allows you to create correct and gradual heating of the liquid.

The electronic component of the boiler is painless against voltage drops and sudden surges.

When covering the inner surface of the water heater with a protective layer, UMS technology is used, which makes it possible to increase the service life of the device several times.

According to information from the manufacturer, the device is provided with warranty service for 7 years. The internal volume of this boiler is only 50 liters, but this is quite enough if hot water is used correctly. The pricing policy of the model starts from 10,120 rubles.

The well-known company for the production of household appliances Electrolux presents a model of a high-quality water heater Centurio Ewh 80, which is produced and assembled in Sweden. The first thing users should pay attention to is the design of the device. It is designed in a modern style, with no sharp corners or unnecessary controls.

Water heating is provided through the operation of two heating elements, the total power of the device is 2000 W. The boiler tank is designed for 80 liters, the water reaches a nominal temperature of 75 degrees in 2.17 hours.

LED display installed. The device is controlled by electronic switches.

There are a lot of additional functions and elements available: an RCD is installed, a fast water heating function, an energy saving mode, a safety valve.

The internal tank of the water heater is made of stainless steel.

The price for Electrolux Centurio Ewh 80 starts from 10,800 rubles. The device can be called budget, but the expanded functionality of the device and the reputation of the manufacturer allow us to place this boiler on a par with more expensive models.

Summing up

The above rating allows you to choose which company has the best storage water heater and reveals the features of each model. It is necessary to pay attention not only to the manufacturer, but also to the build quality, as well as the reliability of the components.

Name
Heating method	electric	electric	electric	electric	electric
Volume of the tank	80 l	80 l	80 l	50 l	80 l
Power consumption	2.5 kW (220 V)	2.5 kW (220 V)	2.5 kW (220 V)	2 kW (220 V)	2 kW (220 V)
Number of water points	several points (pressure)	several points (pressure)	several points (pressure)	several points (pressure)	several points (pressure)
Installation		vertical, bottom connection, mounting method: wall	vertical, bottom connection, mounting method: wall	vertical, bottom connection, mounting method: wall	vertical, bottom connection, mounting method: wall
Price	from 8800 rub.	from 15,700 rub.	from 6600 rub.	from 8300 rub.	from 15200 rub.
Where can I buy

How to choose an electric storage water heater in 2017. The advantage of models operating from the network is that they can maintain the temperature of heated water in an economical mode; moreover, they do not consume much electricity and are connected to a regular outlet. With all this, the cost of electric boilers for home use does not exceed 20 thousand rubles (the average price is about 10-12 thousand). Next, we will provide the most important tips for choosing a storage water heater for your home, apartment and cottage.

Criterias of choice

Volume of the tank

The first thing you need to decide is what volume of electric boiler to choose. It depends on how many people are in the family and what the water heater will be used for. First, let's talk about the purpose of the water heating tank.

If you need to choose a device for your apartment so that there will be hot water when the heating season ends, first of all focus on the free space in the room (kitchen or bathroom). If space allows, for bathing you need to select a boiler with a volume of at least 80 liters if a bathtub is installed and 60 liters for a shower stall. Again, this still depends on the number of people who need an electric water heater, but more on that below. If you are choosing a storage tank for washing dishes, you can choose a 10 or 15 liter model, which will be quite enough.

As for the number of people living in an apartment or house, everything here is also ambiguous and depends on several factors. For example, you can even choose an electric boiler with a capacity of 60 liters for a family of 4 people, but in this case you will have to wait until the water heats up after each person bathes. In addition, a very important selection criterion is the place of bathing - shower or bath. It is clear that using a shower is much more economical; you can spend about 15-20 liters of hot water, while a bathroom will require at least 50 liters per person. Based on these nuances, you should choose a suitable storage water heater. As for averages, we recommend focusing on the following figures:

• it is enough for one person to select a tank with a volume of no more than 50 liters;
• for a family of two or three, choose an 80-liter device;
• If there are 4 or more people in a family, the volume of the storage electric boiler must be at least 120 liters.

Just so you know, there are water heaters with a capacity of up to 300 liters, but the price of such models is quite high. The most popular value is considered to be a 100-liter tank, which is purchased both for a private home and for a summer residence.

Power

The next criterion for choosing a boiler is the power of the heating element. In 2017, this characteristic can take values ​​from 1 to 6 kW, and can be connected to a single-phase or three-phase network. To choose the right power for an electric water heater, you first need to focus on the electrical wiring in the house. If the wiring is new and can withstand a load of 6 kW, then the power is selected only based on needs (the more powerful the heating elements, the faster the water is heated, but the energy consumption is greater). If the electrical wiring in a house or apartment is old, the most you can count on is a 2.5 kW model.

Please note that the most optimal value is a power of 2 kW. In this case, the water will heat up for about 3 hours to maximum temperature, which is not that long.

Inner coating

Everything is simple here - cheap water heaters are produced with glass-ceramic or enamel coating. More expensive electric water heaters use stainless steel or titanium coating. Decide for yourself which boiler design option is best to choose, but keep in mind the following features:

1. The warranty period for storage tanks made of stainless steel is longer.
2. There are negative reviews on thematic forums, saying that stainless steel negatively affects the taste and smell of heated water, but this issue is very controversial.
3. Steel tanks have a weld that may leak over time. The question is also ambiguous, because the warranty period for such models is longer.

However, all modern storage water heaters are made of steel, so we recommend that you choose this option for your home, apartment or cottage! By the way, you can determine the quality of a boiler by weight - the heavier the tank, the thicker its walls, and accordingly, the better the corrosion resistance.

Extra options

I would also like to highlight a few useful tips on choosing a high-quality electric water heater:

• Storage water heaters can be equipped with wet or dry heating elements. The advantage of the latter option is that it prevents contact with water (and, accordingly, the formation of scale), and reduces the risk of electric shock (the heater is located in a sealed flask).
• Pay attention to the thermal insulation layer of the tank. The thicker it is, the longer the boiler will retain heat. If you want to wisely choose a high-quality electric water heater for home use, consider models with an insulation thickness of at least 35 mm. As for the thermal insulation itself, it is better that it be represented by foamed polyurethane, which is an order of magnitude superior to foam rubber.
• When choosing a device, know that it must have a magnesium anode, an accelerated heating function, a power-on indicator and, most importantly, overheating protection. Also, modern models can be equipped with a freeze prevention mode, which will be a good addition when purchasing an electric storage water heater for a summer residence.
• There is a special one that displays how protected the electrical appliance is from moisture and dust. So, the water heater must have an IP index of at least 23. For bathrooms and saunas, it is better to choose a model with a degree of protection IP44.

By the way, did you know that a boiler can even be used for heating? We talked a little about this issue in our article -.

Since we don’t have to rely on the availability of hot water, we need to stock up on water heaters for emergencies. Modern models are very convenient, compact, and most importantly - effective. Despite this, you may come across a low-quality model that has received poor customer reviews. Below we have selected for you a rating of the 10 best storage electric water heaters of 2018.

Which brand of water heater is better to choose?

Many users buy products only from trusted companies. According to the latest data, the rating of water heater manufacturers is as follows.

Gorenje - 19%, Hotpoint-Ariston - 11%, Electrolux - 9%, Atlantic - 9%, Bosch - 5%, Zanussi - 5%, NOVAtec - 4%, Thermex - 4%, Roda - 4%, Tesy - 4 %, Klima Hitze - 3%, Others - 23%.

In addition to the brands presented above, there are less popular ones, or those that have appeared on the Russian market only recently, but which are also distinguished by high quality products - these are Timberk and AEG. But if Timberk products can be classified as mid-price, AEG water heaters are classified as premium.

What should you pay attention to when choosing a boiler?

Surely you have more than once encountered the problem of lack of hot water in your home, which is why you ended up on this page. But what to do if you have never chosen a water heater? Below we will describe the main criteria that you should pay attention to when choosing a storage water heater.

Water heater type

• Cumulative- the most popular type of water heaters, which heat water in a tank, inside of which there is a heating element. As you use it, cold water comes in and is heated to the desired temperature. Features of this type are the use of low power and the ability to connect several water points.
• Flow-through- in these water heaters, the water instantly becomes hot as it passes through the heating elements. The features of the flow-through type are its small dimensions and the fact that you do not need to wait for the water to heat up.
• Liquid- this option is most suitable for those places where there is no own water supply system (dachas, garages). Water is poured into the tank manually by the user, and there is a tap on the side for supplying warm water. As a rule, such models are installed directly above the sink.
• Heating tap- This is a regular faucet with a small built-in heating element. The operating principle is the same as that of the flow type.

In this article we will consider only storage water heaters (boilers); if you want to learn more about instantaneous water heaters, follow the active link.

Tank volume

This indicator should be calculated based on the number of family members and their needs for hot water. To do this, it is customary to use average water consumption figures per person:

It is worth noting that in a family with a small child, hot water consumption increases significantly.

Tank inner lining

The most popular are two materials:

• Stainless steel - This is a practically indestructible material that is highly durable and reliable. The disadvantages include the inevitable appearance of corrosion, which manufacturers have already learned to deal with.
• Enamel coating- despite outdated technology, enamel is in no way inferior to steel in terms of characteristics. Modern additives that are added to chemicals. composition, have properties similar to metal. With the correct enamel application technology, the coating will last you a very long time.

Anode

The anti-corrosion anode significantly increases the service life of the device. It neutralizes the environment and prevents oxidation, that is, the appearance of corrosion on welds. The magnesium anode is replaceable, the average service life is up to 8 years (depending on the conditions of use). Modern titanium anodes do not need to be changed; they have an unlimited service life.

The best storage water heaters up to 30 l

Boilers with a small volume are ideal for washing dishes and washing. The shower will need to be taken very sparingly and the other person will have to wait for it to reheat.

3 Oasis VC-30L

Third place in the category “boilers up to 30 liters” is occupied by the compact model Oasis VC-30L. The small dimensions allow the device to be placed in a small apartment, and protection against overheating and overpressure makes the device completely safe to operate.

The 1.5 kW copper heating element can heat a full tank to 75°C in a matter of minutes. To retain heat inside the tank, environmentally friendly thermal insulation made of urethane integral foam is provided. Using the adjustable handle, you can set the required temperature level (from 30℃ to 75℃).

The inner coating of the tank consists of sapphire enamel. This material prevents microcracks from appearing in the housing and also reduces the likelihood of leaks. For additional protection against corrosion, a magnesium anode is provided.

• High quality build
• Heats up a full tank of water quite quickly
• Compact dimensions
• Economical in terms of energy consumption

• Not detected

2 Timberk SWH RS7 30V

Second place goes to the super-narrow Timberk SWH RS7 30V. The beautiful design of the outer case and the cylindrical shape of the tank allow you to place the device in almost any room.

The powerful dual heating element has 3 operating modes: economical, optimal and intensive. The internal tank is made of stainless steel; an oversized magnesium anode is provided for corrosion protection. To retain heat, the inside of the tank is insulated using high-precision foaming technology. By retaining heat inside, the water heater saves a significant amount of electricity.

The security system of Timberk SWH RS7 30V is at the highest level. It provides protection against leakage and overpressure, an RCD and two-level protection against overheating. A simple and convenient control panel allows you to use the device to the maximum.

• Super-narrow design, easy to fit in tight spaces
• Heats up quickly and keeps the temperature high for a long time
• Three operating modes
• Simple and easy to use

• Does not display current temperature

1 Polaris FDRS-30V

The FDRS series of water heaters is one of the most popular on the market. High quality and functionality allowed Polaris FDRS-30V to take first place among boilers up to 30 liters.

The small volume of this boiler will be quite sufficient for cases with a temporary shutdown of the hot water supply. A modern electronically controlled display allows you to set up the device in minutes. Two nickel-plated copper heaters ensure rapid heating of the water in the tank. A protective magnesium anode will prevent rust from appearing on the welds on the inner surface of the tank.

Polyurethane foam thermal insulation will retain heat inside the housing, saving you a significant amount of energy for reheating. Several water points will allow you to use the device in several places at once (bathroom and kitchen).

• Informative display
• Heats water quickly and retains heat for a long time
• Overheat protection
• Stainless steel interior

• High price

The best storage water heaters for 50 l

This is the most popular volume among buyers, since one person will need 50-60 liters of water to take a shower. However, the second person will have to wait for reheating.

3 Thermex Flat Plus IF 50V

The compact boiler Thermex Flat Plus IF 50V takes third place in the rating among models with a 50-liter tank. Its main advantage is the optimal combination of power, quality and price.

The Termex boiler with a power of 2 kW is equipped with two heating elements (1x1300 W and 1x700 W). This is done so that one works constantly, and the second is connected to accelerate water heating. When this function is activated, the heating element begins to work at full power, which allows you to reduce the time spent on heating by 2 or more times.

The inner coating of the tank is made of stainless steel. This is a highly durable material, but corrosion may appear at its seams. To avoid this, the manufacturer has provided a magnesium anode, which helps neutralize the environment by releasing electrons. The design also includes a safety valve that protects against excess pressure.

• Relatively low price
• Compact dimensions allow the device to be placed even in a small room
• Heats up quickly in Turbo mode
• overheat protection

• Settings are reset when power is turned off
• The temperature is not always shown accurately

2 Electrolux EWH 50 Formax DL

The second place is occupied by the product of the famous Electrolux brand. This is a model thought out to the smallest detail, which has enhanced protection against corrosion, a simple and intuitive control interface and good thermal insulation.

The unique Multy memory function allows you to memorize up to 3 operating modes. Simply program your favorite water heating temperatures and select them later using the mode setting button. Multy memory remembers information even after power is turned off.

The inner coating of the tank is made of glass ceramics. Despite the fact that this material is one of the cheapest, it is very common due to its anti-corrosion properties. Also, a magnesium anode of increased mass protects against corrosion on the metal body. The presence of a built-in thermostat will protect the device from overheating.

• Cute design
• Convenient operation due to digital display
• Three power levels (800/1200/2000 W)
• The water in the boiler cools down for a very long time due to good thermal insulation

• Not detected

1 Polaris Vega SLR 50V

Polaris Vega SLR 50V ranks first in the category of storage electric boilers with a tank size of 50 liters. This model features an advanced security system and a simple control panel.

This model can solve the problem of lack of water in an apartment or country house. Compact dimensions and stylish design allow the device to be placed in any room, and the presence of a residual current device (RCD) and overheating protection make the operation of the boiler as safe as possible.

The equipment is practically no different from the models given above. This Polaris model is equipped with a convenient control panel, indicators for turning on and heating water, polyurethane foam thermal insulation, accelerated heating and an electronic thermometer. This is a very high-quality model, as confirmed by positive customer reviews.

• Doesn't take up much space, but at the same time it's enough for the whole family
• The water in the tank heats up very quickly
• Works almost silently
• There is a protective shutdown device

• Not detected

The best storage water heaters for 80 liters or more

Boilers with a tank volume of 80 l, 100 l and 150 l are most often used in dachas and private homes. This volume will be enough for several people to buy without reheating, but at the same time the time for heating the water increases several times.

4 Stiebel Eltron 100 LCD

Stiebel Eltron 100 LCD is an incredibly functional, but at the same time very expensive electric storage water heater. This model combines high German standards, advanced technologies and a high safety class.

The first thing that attracts the buyer's attention is the multifunctional liquid crystal display. On it you can see the amount of energy consumed, temperature, current amount of water in the tank, operating modes, and so on. In addition, the self-diagnosis mode will report problems in the operation of the device.

The enamel inner coating of the tank will prevent rust. The Stiebel Eltron 100 LCD also features a titanium anode, which, unlike magnesium, does not require replacement or maintenance during operation. It is also worth noting the function of two-tariff power supply mode, boiler and antifreeze mode.

• Very powerful device, heats water quickly
• Keeps warm well
• Convenient control
• Additional modes of use

• Very high price

3 Gorenje GBFU 100 E B6

Gorenje GBFU 100 E B6 ranks third among the best storage electric water heaters for 80 liters or more. This model is created using modern technologies, which ensures reliable operation and easy maintenance.

The main advantage compared to analogues is the presence of a “dry” heating element. This type of heating element is protected from scale and damage by a special bulb. Plus, the internal surface of such devices is completely covered with enamel, which means that the load on the magnesium anode is much less.

How to decipher the name Gorenje GBFU 100 E B6?

G.B.- denotes a “dry” heating element.

F- compact body.

U- can be installed vertically or horizontally (the pipes are on the left).

100 - volume of the water tank in liters.

B- outer casing is metallic and painted.

6 - inlet pressure.

Otherwise, the equipment is practically no different from competitors. This Gorenye model has 2 heating elements with a power of 1 kW each, a mode for preventing freezing, economical heating, a check valve, a thermometer and an indication of the boiler operation.

• Retains heat for a long time
• Good reliability for the price
• Universal installation
• Dry heating element and power of 2 kW

• The thermometer sometimes shows incorrect values

2 Polaris Gamma IMF 80V

Second place goes to the incredibly simple but effective Polaris Gamma IMF 80V. Due to a reliable heat-insulated tank and several water supply points, the boiler is ideal for use in houses, bathhouses, cottages, apartments and so on.

Today, boilers are gaining more and more popularity among users. These sources of hot water supply help you live comfortably all year round, without depending on the operating schedule of heating networks. The leading positions are occupied by those devices that can accumulate and retain heat. This makes you wonder: which brand of storage water heater is best for your home?

Storage water heater device

Before talking about the offers of specific brands, you should decide on the requirements that such equipment must withstand. Each of them is important:

• volume;
• power;
• heating element type;
• fastening type;
• tank cover;
• availability of options.

Capacity options

To understand the volume, you need to know for what purpose the device is being purchased. If only for washing dishes, then a “baby” of 15 liters will be enough. However, users are usually not content with little, and therefore a good boiler should include a shower and even a bath. For such purposes, a capacity of 100-120 liters will be sufficient - the water heater will successfully meet the needs of a family of three (the hot volume will also be diluted with cold water).

How to understand what volume is needed for your family? Usually to apartments buy boilers with a capacity of 80 to 100 liters (the small dimensions of the bathroom and kitchen simply won’t allow more). In the cottage this limitation is removed - here it is possible to allocate space even for a 200-liter tank.

Power and heating element

The capabilities of the internal reserve are closely related to the power of the boiler. Depending on the volume indicators, the unit uses one or two heating elements. For a small tank of 15 liters, a power of 1 kW will be enough, 30-50 liters already increase consumption to 1.5 kW, and in the case of large boilers from 80 liters and above, a heating element with a range from 2 to 2.5 kW is used.

On the question of the heating element: in its classic form, it will be made of a copper tube, inside of which there is a conductive nichrome thread. This type of heater is conventionally called “ wet"due to the fact that it works directly in the water. Such service is fraught with consequences in the form of scale growing on the element.

To prevent the part from breaking down, it will need to be cleaned once a year.

“Wet” heating element of a water heater

Recent innovations in this area include "dry" heating element: when the heating part is placed in a special flask, which will come into contact with water, heating it. This solution turns out to be much safer and more reliable, but it will also cost more.

“Dry” heating element of a water heater

The units will have even more impressive sums with two heating elements: such devices will heat water much faster. Having reached the set temperature, one of these two parts (usually with a power of 2.5 and 1 kW) turns off - this is the program.

Secure fastening

We’ve sorted out the main criteria, now it’s worth thinking about where the device will hang. For installation, it plays a big role whether this equipment will hang vertically or horizontally on the wall. It all depends on the specific model: flat options are located horizontally. Typically, a storage electric boiler looks like a cylinder or rectangular parallelepiped.

This device is attached using mounting brackets on dowels in the wall surface. It is desirable that it be load-bearing, but if this is not the case, then for greater reliability you should install a through pin - after all, sometimes you will have to withstand more than a hundredweight of weight.

Which water heater should you choose – a traditional cylinder or an ultra-modern air conditioner-like device? Better is the one on which fewer seams. And one more point is the pressure that the water in it exerts on the equipment. Cylinders tolerate it best.

Inner coating

A variety of materials are used for the inner surface of the tank - here are high-quality enamel, a titanium layer, stainless steel, and glass ceramics. There are also anti-corrosion protection– the magnesium anode located inside the tank is responsible for it.

Some models feature finely dispersed inclusions of silver. This “know-how” makes it possible to claim the disinfecting properties of water flowing from the device.

Simple and intuitive controls

Even the cheapest brands of modern water heaters always have temperature controllers and thermostats, which will turn heating on and off in a given program in automatic mode.

And if the model is expensive, then a priori it will also be smart, because in this case the work has been entrusted powerful processor. Its task is not only to maintain the required temperature, but even to disinfect the water. Another “trick” users call is the ability to create a user schedule and, if necessary, turn on both heating elements for faster results.

Typically, such devices look stylish and presentable. The impression is completed by the touch screen, on which settings and changes can be made with a light touch.

Review of water heaters from different companies

Many global equipment manufacturers are ready to offer interesting models of boilers of their brand. You can understand which water heater from which company will be better only by conducting a detailed analysis of the strengths and weaknesses of the device.

Advanced "Ariston"

The leading position is occupied by products from Ariston. This Italian brand tries to keep abreast of global trends and produces high-quality equipment that meets all consumer requirements. The products are represented by boilers with a volume from 30 to 100 liters (and the corresponding power volume). The inner surface is also interesting - it can contain either simple enamel or the same one with silver marked AG+. Titanium and stainless steel are present right there. The advantages include electronic control capabilities and even the presence of modern touch screens.

Additional features include use of a divider, which will not allow the heated and newly received portions of water to mix. It is also captivating that the developers took care of the likelihood of emergency situations - in this case, the protective relay will prevent electric shock and prevent damage to the entire device. And the device itself simply will not turn on if there is no water in the tank.

Not without some shortcomings. These include the lack of fasteners.

You can better understand the “essence” of the device using the example of the Ariston ABS VLS PW 50 model, which has average statistical indicators - a tank of fifty liters and a power of 2.5 kW. This allows the device, measuring 490x800x270 mm, to heat water up to 80 degrees. There is a mandatory thermometer and even a heating temperature limit. The protection provides for blocking the device from turning on in the absence of water. There are 2 heating elements, and the internal coating is stainless steel. The device is hung vertically.

Users are also satisfied, saying that the equipment does not heat up from the outside and there are no problems with it during network outages. Given the amount of water, you can easily fill a bath and still have some left over for a shower.

Elegant "Electrolux"

Another famous brand, Electrolux, has also stood the test of time (in 2019 it will cross its centenary mark). Over all these years, only one thing has not changed - the undoubted quality of the products. But the functionality has only increased.

1. Models from this manufacturer contain a limit sensor, various relays for protection against overheating, and a mandatory thermometer.
2. The glass-ceramic surface of many models will not accumulate rust. In addition, there is a function for water disinfection.
3. Cleaning the heating element is easy and simple thanks to a well-thought-out process.
4. Finally, the two-heater mode significantly saves electricity.

Electrolux always stands for impeccable, first-class products. But there are some downsides: technology is usually very expensive, and the heating elements themselves are short-lived in operation.

One of the most popular offers from this company is the Electrolux EWH 50 Royal for 50 liters with a power of 2 kW. It heats the water to a maximum of 75 degrees. It has fairly compact dimensions - 433x860x255 mm and is mounted vertically on the wall. The device is quite simple to operate (it is mechanical). There are many protection options: from overheating, from running without water, check valves and safety valves. And in the functions, in addition to standard temperature restrictions on heating, there is an accelerated process.

"Gorenje" for everyone

The Slovenian manufacturer Gorenje tries to satisfy the requirements of all its consumers. That is why all their devices turn out to have very different power and water volume. However, almost all of them have enamel and stainless steel as an internal coating. The units also provide hydraulic control, overheating protection and a power sensor, and a safety valve.

For example, the Gorenje GBFU 80 E B6 with dimensions of 454x816x461 mm has a displacement of 80 liters and consumes 2 kW of power. Installation on the wall in a horizontal form (which saves space) requires bottom connection. The maximum possible when heating water is 75 degrees. There is even frost protection. Users note that the device is very economical and quickly heats water, but it has the problem of knocking out plugs, therefore, you need to think about running a separate cable.

Convenient "Atlantic"

The Atlantic brand produces boilers with volumes from 30 to 160 liters. There are horizontal and vertical mounting options. The internal coating is interesting: inside the tank it represents titanium alloy with cobalt and quartz inclusions(and this is already fourth class water protection). Owners of the devices like their stylish, laconic design and build quality.

The manufacturer has a compact narrow model measuring 338x918x345 mm - Atlantic O'Pro Slim PC 50 with a capacity of fifty liters and a power consumption of 2 kW. The device has a maximum heating capacity of 65 degrees.

Specialized manufacturer "Termex"

Here you can quote the company’s official website: “There is a fact that cannot be argued with. If a company has been producing water heaters alone for more than half a century, while its volumes have increased 20 times over the last 10 years alone, and its products are well sold in 160 countries around the world, then these are good water heaters. This is what true professionalism consists of.”

Equipment from this brand is not cheap, but boilers from Thermex always offer excellent build quality, durability and cost-effectiveness in operation. The latter criterion is confirmed in the Thermex Champion ER 80V model, which has 80 liters of displacement, heating with just 1.50 kW. The dimensions are quite compact even for small apartments - 450x730x470 mm, and the device is hung using vertical mounting. Users joke about this boiler: they say it’s from the “turn it on and forget it” series. The only drawback of the device is that once every six months you have to change the anti-corrosion anode.

Domestic offers

Which company would be best to purchase a storage water heater for your apartment? Perhaps it will be one of the models of Russian manufacturers.

For example, they gained a certain popularity in the Russian Federation boilers from the Alvin company. The line called “Success” turned out to be successful - both in quality and in capabilities. The Success-15 model will operate with a power of only 1.25 kW, however, the tank volume will not exceed 30 liters. The automation of the equipment will not allow the water heating to rise above 70 degrees (this will happen in about 40 minutes). There is even a special system that retains heat when the boiler is turned off. This is also facilitated by the 1mm thick stainless steel used in the technology, which has a positive effect on the longevity of the boiler.

Boiler Alvin "Success" line

Another excellent domestic example is "Moidodyr". The brand also specializes in small heaters (about 15-30 liters), which are enough for washing dishes and for personal hygiene in the country. The device operates from 1.25 kW, is protected from overheating or the possibility of switching on “dry”. The design itself is also interesting - a frame with a heated 20-liter tank and a sink (which is reminiscent of the famous fairy-tale hero). A full tank will heat up in about 50 minutes, without rising beyond the 70-degree limit.

Water heater "Moidodyr"

Which storage electric boiler to purchase must be decided based on the requirements of future users and their number. The main thing is to perform the installation correctly and follow the operating rules in the future, then the device will prove to be a reliable and trouble-free assistant.